User's Manual

Chapter 1 INSTALLATION
20
1-4 CONNECTING THE INSTALLATION CABLE
Scanner type is selected from two types.
2 ft scanner (NKE-2044) ,and 1.5 ft scanner(NKE-1066).
Both are the radome type, they are no affect from the wind blow.
Because inside microwave radiator is protected by fixed radome.
Even under the strong wind blow conditions, microwave radiator can rotate stable anytime.
The cable’s both ends is already processed in factory.
First step, remove radome and connect the cables as follow.
Open cover, and connect as follows.
Display side
Scanner side
Fig 1-4
braided shield
braided shield
(unit: mm)
(unit: mm)
screw locking