User's Manual

3－94

JMA-9100 Instruction Manual > 3.BASIC OPERATION > 3.8 APPLIED OPERATIONS

3.8.1.7 Fast Target Detection

• This function displays fast moving targets that are suppressed in scan-

correlative process mode.

• This function is enabled when , , or

is selected as the video process mode.

• If unwanted waves remain on the radar display, suppress them by using the

[SEA], [RAIN], or [GAIN] dial, or adjusting the interference rejection mode.

: Disables the Fast Target Detection function.

: Enables the Fast Target Detection function.

3Scan CORREL 4Scan CORREL

5Scan CORREL

Off