User's Manual

JMA-9100 Instruction Manual > 1.GENERAL AND EQUIPMENT COMPOSITION > 1.3 CONFIGURATION

1－5

Notes:

1) The drive motor for the scanner unit is available in AC100-115V

or AC220-240V type for NKE-1139/1130/1125/1129 series. Please

specify the motor type when ordering.

2) The motor of NKE-2254/2103 can operate under both AC100-115V

and AC220-240V, then need not to specify the motor type.

3) When using NKE-2254/2103, they need AC/DC Converter Unit

NBA-5135 (Option) in display unit.

4) The scanner unit except NKE-2103 series can be equipped with a

deicing heater as an option, and '-D' shall be suffixed to the type

name. (e.g. NKE-1139-D, NKE-1125-6D).

5) When using the ship's mains of AC440V as the radar power

source, a step-down transformer shall be used.

6) The desktop option is available for display NCD-4990. It has a

separate structure consisting of the following:

7) In JMA-9123, the following type name of JRC is used for the

waveguide between the scanner unit and the transmitter receiver

unit.

8) In JMA-9133, the following type name of JRC is used for the RF

coaxial cable between the scanner unit and the transmitter

receiver unit.

Monitor Unit NWZ-170

Radar Processor Unit NDC-1399-9

Operation unit NCE-5163

Type of Radar Waveguide Length(m) Type name of JRC

JMA-9123-7XA/9XA FR-9 20MT H-7AWRD0003

JMA-9123-7XA/9XA FR-9 30MT H-7AWRD0004

Type of Radar RF COAX cable Length(m) Type name of JRC

JMA-9133-SA HF-20D 30MT HF-20D (30MT)