User's Manual

JMA-9100 Instruction Manual > 2.CONTROL PANEL KEYS and SOFTWARE BUTTONS> 2.2 NAMES AND FUNCTIONS OF

CONTROL PANEL KEYS

2－15

[DATA OFF] (DATA Off) key

This function sets the graphics other than HL, range ring, EBL, and VRM to OFF

temporarily while this key is pressed.

→3.4.11 on page 3-34

[PANEL] (Operator panel brilliance) key

This function adjusts the lighting brilliance of various switches and dial positions on the

operator panel. The brightness changes cyclically whenever this key is pressed.

→3.4.13 on page 3-35

[USER] key

By pressing this key, the signal processing setting that is preset can be called.

The setting changes to FUNC OFF ==> FUNC1 ==> FUNC2 ==> FUNC3 ==>

FUNC4 whenever this key is pressed.

If this key pressed for 2 seconds or more, the function setting menu is displayed.

→3.9 on page 3-111

[OPTION1] key

By pressing this key, the pre-registered menu position can be directly displayed.

At factory shipment, the calling of [Main Menu] is assigned.

→3.8.7 on page 3-103

[OPTION2] key

By pressing this key, the pre-registered menu position can be directly displayed.

At factory shipment, the calling of [Sub Menu] is assigned.

→3.8.7 on page 3-103

Track ball

This function moves the cursor mark to any position. Use this function for setting in

each mode.

Use this function to specify a center position of floating EBL and an off-center position.

→3.3.1 on page 3-14

[Track ball left button]

Use this function to confirm menu selection and numeric value input.

[Track ball right button]

Use this function to reset menu selection and numeric value input.

[BRILL] (Brilliance dial)

This dial is provided at the right of the monitor. Use this function to adjust the brilliance

of the monitor.

→3.2.1 on page 3-6