User's Manual

JMA-9100 Instruction Manual > 5.OPERATION OF TARGET TRACKING AND AIS > 5.2 TARGET TRACKING OPERATION

5－21

3) Left-click

The Property will appear.

4) Left-click the item button of

The reference target function will be set to on or off.

5) Left-click the speed sensor switching button in the Own Ship

Information located at the upper right of the display, and select

The speed of own ship calculated from the reference target will be displayed.

When a reference target is set, the symbol display is changed to .

Only one target can be set as a reference target.When a new reference target is set, the

previously set reference target is canceled.

5.2.7 Operation Test (TT Test Menu)

The following functions are available for testing the target tracking function:

:A reference target is set.

:The reference target is canceled.

This function is provided to test if the target tracking

function is operating normally. Thus, do not use the

function except when you test the target tracking

function.

In particular, if the operation test mode is used during

navigation, pseudo targets appear on the radar display

and they are confused with actual targets.

Do not use the mode during navigation. Otherwise, an

accident may result.

Test Video Makes an operation check on the target detection circuit.

TT Simulator Generates pseudo targets on the radar display in order to test

if the target tracking function is operating normally.

Status Displays the status of the target tracking function.

Gate Display Displays the gate size for acquiring / tracking a target.

8. Property

3. Reference

Off

REF.