User's Manual

5－28
JMA-9100 Instruction Manual > 5.OPERATION OF TARGET TRACKING AND AIS > 5.3 AIS OPERATION
5.3.5 Displaying AIS Information [TGT DATA]
5.3.5.1 Types of information displayed
There are two modes (simple and detail) to display AIS target information. The
display items are determined by the selected mode.
The detail mode displays the numeric data of only a single ship, the simple mode can display
the numeric data of up to two ships.
For NAV Status, one of the following statuses is displayed in accordance with
Navigation Status:
Display Item Detail mode Simple mode
NAME (ship name) Up to 20 characters
Call Sign Up to 7 characters
MMSI Up to 9 characters
COG (course over ground) or CTW (course through water)
0.1° unit
SOG (speed over ground) or STW (speed through water)
0.1kn unit
CPA (closest point of approach) 0.01NM unit
TCPA (time to CPA) 0.1min unit
BRG (true bearing) 0.1° unit Not
displayed
Range 0.01NM unit
HDG (heading bearing) 0.1° unit
ROT (rate of turn) 0.01° /min
POSN (latitude / longitude) 0.001' unit
Destination (waypoint) Up to 20
characters
NAV Status Status (number)
No. Status
0 Under Way Using Engine
1at Anchor
2 Not Under Command
3 Restricted Manoeuvrability
4 Constrained by Her Draft
5 Moored
6 Aground
7 Engaged in Fishing
8 Under Way Sailing
9 Reserved
10 Reserved
11-14 Reserved
15 Not Defined