User's Manual

3-49
3.5 USE OWN SHIP'S TRACK DATA
(Not used on the JPL-600-MK2 for VTS)
The own ship's track function saves and displays own ship's track.
If navigation equipment is connected, this radar system records latitude / longitude data sent from the
navigation equipment and displays own ship's track.
Note:
Even when own ship's track interval switching (lower right of the display ③ on page 2-21)
is set to Off , own ship's track can be displayed. However, in this case, if rewrite
operation such as changing of the display range is performed for the radar display, own
ship's track display is erased and the track will not be plotted again.
If the DISP Own Track is turned off when the own ship track is in save, own ship's track is
not shown of the display, but own ship's track data is still saved.
When a plotter unit (optional) is connected, own ship's track can be displayed and saved in seven
different colors. The color display can be turned on or off by color.
3.5.1 Display Own Ship’s Track (Display Own Track)
Procedures 1 Open the Own Track Menu by the following menu operation.
O.TRK
2 Press the [1] key.
The DISP Own Track function item is turned on or off.
On : Own ship's track is displayed.
Off : Own ship's track is not displayed.
3 Press the [MAP] key.
The map display function is turned on or off.
Selecting On will display own ship's track.