User's Manual

3-82
3.8 Applied Operations
y
y y
3
[3] Trails Reduction
• Make a setting for thinning radar trails.
• The effect of thinning increases in order of Level1 → Level2 → Level3 .
• Radar videos do not become obscure because of the thinning of radar trails.
Off : Disables the Trails Reduction function.
Level1 : Enables the Trails Reduction function. (Effect: Low)
Level2 : Enables the Trails Reduction function. (Effect: Middle)
Level3 : Enables the Trails Reduction function. (Effect: High)
[5] Trails Process
• Determine whether to use the video process with radar signals for plotting radar trails.
• When Trails Process is On , radar trails are never plotted with unwanted waves, but the radar
trails of moving targets may not be plotted.
• When Trails Process is Off , radar trails may be plotted with unwanted waves, but the radar trails
of moving targets are always plotted.
Off : Disables the Trails Process function.
On : Enables the Trails Process function.
[6] MAX Interval
• Select the maximum time for displaying radar trails.
• Select Short when short radar trails are often used.
• Select Super Long when long radar trails are necessary.
• Continuous trails are available with all the options.
Short : Sets 15 minutes as the maximum time for radar trails display.
Middle : Sets 30 minutes as the maximum time for radar trails display.
Long : Sets 60 minutes as the maximum time for radar trails display.
Super Long : Sets 12 hours as the maximum time for radar trails display.
[7] Trails Erase
• A part of the radar trails can be erased.
• For details on the trail erase, see Section 3.4.9.
[8] File Operations
• For details on the file operations, see Section 3.4.10.