User's Manual

3-110
3
3.12 Display Simple Chart
y
y y
[II] Selecting a copied JRC chart (SEL JRC ROM Card File)
Procedures 1 Insert a compact flash memory card on which a JRC chart has been
copied into slot 2.
Flash memory card (option) is necessary.
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Press the [Map] key for 2 seconds.
The Map Setting menu will appear.
3 Press the [6] key.
The SEL JRC ROM Card File menu will appear.
4 Press numeric keys corresponding to the desired file to be selected.
The selected file will be shown in reverse video.
Cancelling the selected file
5 Press numeric keys corresponding to the file to be cancelled.
The canceled file name will return to the original normal display.
Note:
Up to 2 files of the JRC chart can be selected.
If JRC charts are not copied on the compact flash memory card, the file names is not be
displayed.
3.12.4 Fill Charts (Fill Land Area)
This function fills the chart when JRC / ERC card is in use.
Procedures 1 Press the [Map] key for 2 seconds.
The Map Setting menu will appear.
2 Press the [1] key.
The Fill Land Area function is switched between on and off.
On : Charts are filled.
Off : Charts are not filled.