User's Manual

3-118
3
3.12 Display Simple Chart
y
y y
3.12.7 Correcting Chart Position (Map Display Setting)
Procedures 1 Press the [Map] key for 2 seconds.
The Map Setting menu will appear.
2 Press the [5] key.
The Map Display Setting Menu will appear.
There are three methods for correcting the chart position.
[1] Shift Coast Line 1
With regard to display Coast Line 1, set the correction value by operating the cursor.
Procedures 1 Press the [1] key while the Map Display Setting Menu is open.
The chart display position correction 1 (Shift Coast Line 1) is set.
2 Move the cursor to the chart on which a position is to be corrected,
and Press the [ENT] key.
3 Move the cursor to the radar video of which position is to be
corrected, and Press the [ENT] key.
Setting (correcting) will be indicated for Shift Coast Line 1.
At this time, Map Shift is displayed in the map position correction (lower right of
the display on page 2-4), indicating that the position is being corrected.
Note:
A correction value can be operated in the range -9.999’ to +9.999’.
Cancellation 1 Press the [1] key while the Map Display Setting menu is open.
Delete (no correction) is selected for the Shift Coast Line 1.
At this time, Map Shift is not displayed in the map position correction (lower right
of the display on page 2-4).