User's Manual

4-1
4.1 USE OF MEASUREMENT TOOLS
The system is equipped with the measurement tools below.
Cursor
Specifies an arbitrary point, and measures the range and bearing from the radar station.
Range Rings
Displays concentric circles with own ship's position as the center at specified intervals, and the rings
are used as rough guides for range measurement.
Electronic Bearing Line (EBL1/2)
Displays a straight line for specifying an arbitrary bearing, and measures the bearing from the radar
station.
The process unit is equipped with two electronic bearing lines.
Variable Range Marker (VRM1/2)
Displays a circle for specifying an arbitrary range, and measures the range from the radar station.
The process unit is equipped with two variable range markers.
Parallel Index Line (PI)
Displays straight lines at even intervals, and the lines are used as rough guides for complex
measurement or ship courses.
EBL Maneuver (Not used on the JPL-600MK2 for VTS)
Displays the course by steering the own ship, and it is used as a rough guide for ship maneuvering.
Man Overboard
Stores the latitude and longitude where the own ship was at the point of storing the markers, and
shows an anchor symbol on the radar display. When the own ship has moved, the system displays
the range and bearing to the position.
Use this tool when the ship is anchored or man overboard.
EBL/VRM/PI Operation with Cursor (Cursor AUTO)
Operates EBL, VRM, or PI on the radar display by using the cursor.