User's Manual

5-9
5.1.3 Radar Display
Vector Display
A vector to represent a target’s predicted position can be presented in the True vector or Relative vector mode.
In each mode, a vector length can be freely changed for a time interval of 1 to 60 minutes.
To switch between the true vector mode and relative vector mode, press the [VECT R/T] key.
[I] Vector Mode Selection
True Vector Mode (Not used on the JPL-600-MK2 for VTS)
In the true vector mode, the direction of a target vector indicates the true course of the target and its vector
length is proportional to its speed.
However, CPA Ring cannot appear in this mode.
The relative vector is
not displayed
True vector
HL