User's Manual

5-53
[VII] Operation of Track Data Saved on Card (File Operations)
Track data can be saved on a flash memory card and read from the card.
Note:
Data can be saved to a flash memory card until the card becomes full, but the number of files that
can be read and displayed is limited to 64 in alphanumeric order. When the number of files has
reached 64, delete unnecessary files.
Loading File (Load)
Procedures 1 Insert a flash memory card into the card slot
For the insertion and removal of the card, see HOW TO INSERT AND REMOVE A
CARD in the appendix.
2 Open the File Operations menu by performing the following menu
operation.
T.TRK
→ 7. File Operations
3 Press the [1] key and select a card slot.
The setting item for Select Card Slot is switched between Slot1 and Slot2.
4 Press the [2] key and select Add or Overwrite.
The setting item for Load Mode is switched between Add and Overwrite.
When Add is selected, new data is added to the current data on the card. When
Overwrite is selected, new data is saved over the current data on the card.
5 Press the [3] key.
Currently saved track data on the card will be listed.
6 Press the [numeric] key corresponding to the file to be loaded.
The Confirmation Window will appear.
7 Press the [1] key.
The selected track data will be loaded and shown on the radar display.