User's Manual

1-19
CFQ-6912
MAX f 14.5 (JRC SUPPLY)
19 CORES COMPOSITE CABLE
NJU-82A PERFORMANCE
MONITOR
NKE-600-2F2T/HS SCANNER UNIT
NCM-836A-E CONTROL
UNIT
NCE-5085A OPERATION
UNIT
NCA-891/877A
(JRC SUPPLY)
5m
NWZ-167A LCD
MONITOR
NDC-1376A RADAR PROCESS UNIT
NCD-2034A DISPLAY
UNIT
(JRC SUPPLY)
5m
(JRC SUPPLY)
5m
0.6/1kV-DPYC-6
CFQ-5436-5
MAX f 10 (JRC SUPPLY) 5m
NBA-5070A POWER SUPPLY
GYRO
LOG(200P)
250V-TTYCS-4
250V-TTYCS-1
250V-MPYCYS-7
250V-DPYCYS-1.5
250V-TTYCS-1
GP
S
SHIP'S MAIN
AC100/110/115V 50/60Hz 1f
AC220/230/240V 50/60Hz 1f
H-2695111153
MAX f 18 (JRC SUPPLY)
INTER SWITCH
AIS
LOG(NMEA)
(JRC SUPPLY)
5m
ARPA/ATA PROCESS CIRCUIT (OPTION)
(OPTION)
NCT-59A GYRO INTERFACE UNIT
NQA-2236 AIS PROCESS CIRCUIT
NDB-37 PLOTTER CONTROL UNIT
(OPTION)
(OPTION)
(OPTION)
NOTE: Eliminating the interference on frequencies used for marine communications and
navigation due to operation of the radar.
All cables of the radar are to be run away from the cables of radio equipment.
(Ex. Radiotelephone. Communications receiver and direction finder, etc. )
Especially inter-wiring cables between scanner unit and display unit of the radar should
not be run parallel with the cables of radio equipment.
Performance monitor, ARPA/ATA Process Circuit, AIS Process Circuit and GYRO
Interface Unit must be fitted on ships compliant to IMO.
(OPTION)
Fig. 1.12 General System Diagram of RADAR, Type JPL-600-1ER2-6/6HS