User's Manual

JMA-9172-SA Instruction Manual > 3.BASIC OPERATION > 3.9 USE FUNCTION KEY [USER]
3－113
3
3.9.3 Overview of Function Operations (User Function Setting)
The following outlines the operation of each function selected from the function
setting menu:
Procedures
1) Open the Process Setting menu by performing the menu
operation below.
→
→
→
The User Function Setting menu will appear.
Specify the number for the function for which the settings are to be changed.
The following are the operation overviews of each function setting item.
page 1-[1] Mode
• Selects the function name to be indicated at the lower left of the radar display
when the function is selected.
• When the setting is changed back to the factory setting, the initial value of the
selected mode is called.
• The following 11 modes are provided:
: Use this mode to monitor a relatively short range, for example, bays
and coasts where many boats and ships are running. (Importance is
attached to resolution.)
: Use this mode to monitor a relatively long range, for example, the open
sea. (Importance is attached to long-range gain.)
: Use this mode to detect small targets such as fishnets of round haul
netters hidden by sea clutter returns. (Importance is attached to sea
clutter suppression, and gain to moving targets lowers.)
: Use this mode when many rain / snow clutter returns or sea clutter
returns are detected in stormy weather. (Importance is attached to rain /
snow clutter and sea clutter suppression, and gain slightly lowers.)
: Use this mode when only a few rain / snow clutter returns or sea clutter
returns are detected.
: Use this mode when sea clutter is not strong but rain / snow clutter is
strong. (Importance is attached to rain / snow clutter suppression, and
gain slightly lowers.)
: Use this mode to detect flocks of sea birds.
: Use this mode to monitor utmost distances in the broad ocean.
: Use this mode to detect small targets like radio buoys in areas outside
the sea clutter area. (This mode displays targets of which detection
probability is low.)
: General mode used when the nine modes above are not applicable.
: General mode used when the nine modes above are not applicable.
Main
3. RADAR Menu
1. Process Setting
8. User Function Setting
Coast
Deep Sea
Fish Net
Storm
Calm
Rain
Bird
Long
Buoy
User1
User2