User's Manual

9－4
JMA-9172-SA Instruction Manual > 9.TROUBLE SHOOTING AND AFTER-SALES SERVICE > 9.1 FAULT FINDING
ii. *** is a 3-digit number which is Local Alarm No in the ALR sentence.
Table9-5： List of Route Messages and Warnings
Message Class Description
ALR No.
i
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Approach Alarm Approach the route.
Arrival
Alarm Arrive at way point.
Break Off(WPT)
Alarm Out of the way point.
Cross Track Error
Alarm Go off the route.
Table9-6
： List of Operational Alarm Messages and Warnings
Message Class Description
ALR No.
i
i. ALR No.: Unique alarm number in ALR sentence and ACK sentence
Can't Transmit INFO Tried to transmit within 5 second after standby or
when the transmitter-receiver has any trouble.
Card Full
INFO Card: Run out of free space.
Copy Failed
INFO Card: Copy failure.
Delete Failed
INFO Card: Deletion failure.
Format Card
INFO Card: Unformatted card.
Format Failed
INFO Card: Format failure.
Invalid Card
INFO Card: Invalid card.
Invalid Connection
INFO The operator set performance monitor to on without
selecting straight.
Invalid Data
INFO Tried to enter any data beyond its range.
Invalid Range
INFO TM selection due to TM-disabled range (96 nm).
Zooming in a ZOOM-disabled range (0.125 nm).
MAX Point
INFO Tried to enter navigation information beyond the
specified.
No Card
INFO Card not detected yet.
No Heading Data
INFO Target tracking operation or TM selection when
bearing data is invalid.
No Object
INFO No object at the cursor-specified position.
No Position Data
INFO Mark or line input when the latitude and longitude is
invalid.
Not Allowed
INFO General operation error.
Out of Range
INFO Out of target acquisition range.
Read Failed
INFO Card: Read failure.
Slave Mode
INFO Operation of a menu for the scanner unit when the
slave mode is active.
Write Failed
INFO Card: Write failure.