User's Manual

Chapter 2

OPERATIONS
2.15

SETTING TT/AIS
2-124
z Turning on/off the AIS function
1 Open Function On/Off - AIS .

"AIS" menu appears.
Off : Turns off the AIS function.
On : Turns on the AIS function.
 Setting Collision Decision Criteria
Set and check collision decision criteria before operating.

Input the CPA Limit value.
Turn the [MULTI] control to set the CPA Limit value.
The CPA Limit value can be set between 0.1 and 9.9 NM.

Input the TCPA Limit value.
Turn the [MULTI] control to set the TCPA Limit value.
The TCPA Limit value can be set between 1 and 99 min.