User's Manual

Chapter 12 SPECIFICATIONS
171
12-7 INPUT/ OUTPUT SIGNAL
12-7-1 INPUT ENABLE SIGNAL
(Three-port input GPS/HDG/AIS)
(1) Navigation equipment IEC61162-1/2(※1)
L/L: GGA>RMC>RMA>GNS>GLL
SOG/COG: RMC>RMA>VTG
Log speed: VBW>VHW
HEADING: THS>HDT>HDG>HDM
DEPTH: DPT>DBT
WATER TEMP: MTW
ROT: ROT
RUDDER: RSA
AIS: VDM, VDO, ALR
WIND: MWV>VWT, VWR
WAYPOINT: WPL
(2) Bearing signal JRC-NSK format (JLR-10/20/30)(by NMEA3 port)
IEC61162-1/2(※1) 4800bps/38400bps: THS>HDT>HDG>HDM
(3) Speed signal IEC61162 4800bps: VBW, VHW
※1:IEC61162-2 Conformity is unnecessary.
(Insulation is unnecessary. Input electrical tests are unnecessary.)
Telecommunications standard NMEA0183 / 61162 -1/2
Communications protocol 4800 bps, start 1bit, data 8bit, stop 1bit,
non parity
Input sentence NMEA0183: V1,5: GGA/ GLL/ RMC
V2,0: GGA/G LL/ RMC/ZDA
V2,3 : GGA/GLL/RMC/GNS/ZDA
(Talker=”GP” etc.)
Information classification position and time GGA/G NS/G LL/RMC
date ZDA/RMC
Time ZDA/GGA/GNS/GLL/RMC