User's Manual
3─101
3.9 APPLIED OPERATIONS
3.9.1 Set Radar Signal Processing (Process Setting)
This function enables the setting of detail information about radar signal processing.
Procedure 1 Press [RADAR MENU] key twice.
Press [6] key.
The Process Setting Menu will appear.
Detail information about radar signal processing
can be set by changing the settings of the menu
items.
Note:
After the settings for radar signal processing are
changed, small targets may not be displayed or
unwanted waves may not be suppressed. Thus, do not
make a significant change in the settings.
[1] Video Latitude
• Select the dynamic range in which receiving signals are to be shown on the radar display.
• Select NORMAL in standard, and WIDE in rainy weather.
• NARROW clearly displays short-range videos when STC is used in manual mode.
NORMAL : Standard setting
The dynamic range varies depending on the actual range:
Short range > long range
WIDE : Use this mode when rainy weather intensifies unwanted waves.
The dynamic range is about twice as wide as when NORMAL is selected.
SUPER WIDE : Use this mode when rain cloud remain at WIDE mode.
The dynamic range is about twice as wide as when NORMAL is selected.
NARROW : Narrows the dynamic range at short range.