User's Manual

Chapter 2



OPERATIONS

2.14



FUNCTION KEY SETTINGS

2-113

INSTRUCTION MANUAL

 Calling functions

1 Press the [FUNC] key.



Each time you press the [FUNC] key, the setting is cyclically changed in order of:

Function off  Function1 Setting  Function2 Setting  Function3 Setting

 Function4 Setting  Function off

The currently called function mode is indicated as the right of the screen.

z Calling function setting menu

1 Hold down the [FUNC] key.



"Function Setting" menu appears when holding down the [FUNC] key.

 Changing the setting

z Temporarily changing the setting

y When radar signal processing setting is changed by using the soft key or the menu

operation while function 1 to 4 is called, the change is temporarily reflected to the

operating state.

y Since this method does not change the memory contents, the new setting is deleted as

soon as another function is called.

y When the previous function is called again, operation is performed according to the

memory contents.

z Changing memory contents

y To change the memory contents of functions 1 to 4, use [Function Setting] in the

Main Menu.