User's Manual

Chapter 2

OPERATIONS
2.9

RADAR ECHO SETTINGS
2-81
2
INSTRUCTION MANUAL
2.9.3 PROCESS
 Process
This function reduces unnecessary noise to highlight targets.

Note:

z When viewing a radar beacon, SART signal, or fast moving target on the radar
display, do not use this function.
z This function is suitable for use in TM mode.
z When used in RM mode, use with N Up or C Up. This can be used with H Up,
however, the video may be blurred. Use this in TM mode.
Reference:
The bearing data input is required for video processing.

1 Open RADAR Echo - Process .

"Process" menu appears.
Off : Select this mode in general.
3Scan COREL : Select this mode when many rain/snow clutter returns are
detected.
4Scan COREL : Select this mode to highlight targets while suppressing sea
clutter returns.
5Scan COREL : Select this mode to detect small targets hidden by sea clutter
returns.
Remain : Select this mode when own ship yaws wildly.
Peak Hold : Select this mode to detect small targets of which detection
probability is low.