Operation Manual

Bluetooth mode
PREFACE BY MUSICLIFE LTD.
PREFACE BY JEAN-MICHEL JARRE
IN THE BOX
PRODUCT DESCRIPTION OF THE AEROSKULL HD®
AEROSKULL HD® QUICK START
AEROSKULL HD® REMOTE CONTROLL
OPERATING THE AEROSKULL HD®
VOLUME CONTROL
LED LIGHT INDICATOR
INPUT MODE
OPERATING THE REMOTE CONTROL
MAINTENANCE AND CARE
FIRST HELP BEFORE ASSISTANCE
SAFETY INSTRUCTIONS
APPENDIX I – COMPATIBLE DOCKING DEVICES
APPENDIX II – AEROSKULL HD® GUARANTEE
APPENDIX III – PRODUCT QUESTIONS & ANSWERS
APPENDIX IV - FIRMWARE UPGRADE
APPENDIX V – TRADEMARKS
AeroSkull HD
iPod® - iPhone® Docked mode
Line-in mode
Bluetooth mode
To enable Bluetooth turn On Bluetooth on your device and go to the list of avail-
able devices. Look for AeroSkull HD between the list of the available devices
then select AeroSkull HD to connect to the speaker. If AeroSkull HD does not
appear on the list, please turn your speaker Off and then back On. Once you
have successfully connected to the AeroSkull HD, the Blue LED Light Indicator
located on the tooth of the AeroSkull HD will show a steady blue color, you will
now be able to stream audio.
If your bluetooth device support NFC you will be able to use the feature One
Touch Pairing by tapping your NFC device on the top of the AeroSkull HD (Close
to the lightning connector). The NFC sensor is located in front of the lightning
connector right by the NFC sticker. NFC sticker it is environmental friendly and
easily removable.