JAS AUDIO SPEAKERS ORIOR OWNER’S MANUAL and Package Contents For additional requests If you have any additional questions regarding the installation or operation of our products, you are welcome to contact us directly via email: “ enquiry@jas-audio.com “, and please check frequently our JAS Audio official website: “ http://www.jas-audio.com “. Page 1 of 7 http://www.jas-audio.
JAS AUDIO ORIOR HIGH FIDELITY LOUNDSPEAKERS SYSTEM Smooth, precise, and punchy! Never before will a 2-way bookshelf speaker sound so big and with such details in its sonic reproduction. The quick and agile bass region goes below 40Hz, easily outshines many large floorstanding speakers at higher price range.
Unpacking Inspection The tweeter of JAS Orior speaker is protected with a Transparent-ProtectiveSheet to prevent damaging on the Tweeter Unit (Dispersion Board + Driver Net)*. Customers are recommended to remove the Transparent-Protective-Sheet immediately before using or installing on your listening system! Well prepared before Settling Two caution on your speakers’near placing: I. II. Do not place any kinds of metal pieces, such as: keys, needles, staples... etc.
Unique-Crossover and the switching Key · • • Utilizes a 2nd order filter for bass and a modified 3rd order filter for treble Highest quality components have been used, time aligned of all drivers. Two selectable Designer-Precision-modes: [ Reference ] or [ Dynamic ] operational crossover network to optimize for your amplifiers. Find the best setting that fit your own system, listen to the different carefully by inserting a key at the back switch and turn to the indicated setting mark.
Speaker Stands Some speaker stands are hollow and have access holes that can be used to fill in with sand, lead shot, or some other heavy material. These filler material make the speaker stands more stable (because the center of gravity will be close to the floor) and offer solid reference to the mechanical moving parts of the speakers, thus provide better vibration isolation and damping effect. In this general results in overall improved the sonic performance over the speaker's dynamic range.
This figure shows the relative position of the two speakers and the listening position. The front of each speaker should be angled toward the listening position. ( Result might vary depending on the room acoustic conditions, desirable result can be achieved by continuous tweaking.) Running-in Period The performance of the speaker will change subtly during the initial listening period.
JAS Speaker Specifications Orior Product Model: Description: Technical Features: Drive Units: Frequency Response: Sensitivity: Nominal Impedance: Minimal Impedance: Crossover Frequency: Min.
