User Manual

ManualsBrandsJasco Products ManualsAudio EquipmentBluetooth Headphones

99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM

Page 1 of 5

99003

Bluetooth Stereo Headphones with Playback Controls

Class 2

CAUTION

This product does not have a user-serviceable battery. Do NOT attempt to change the battery yourself.

The battery used in this device may present a risk of fire or chemical burn if misused. Avoid extreme

temperatures.

Do not use this product on an airplane in transit, as it could disrupt communication.

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for

compliance could void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1) this device may not cause interference and

2) this device must accept any interference, including interference that may cause undesired operation of

the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

End users must follow the specific operating instructions for satisfying RF exposure compliance. This

transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Using the product

Thank you for selecting the GE 99003 Multifunctional Stereo Headphones. These headphones provide

users with the ability to receive stereo audio transmitted via Bluetooth wireless technology along with

hands-free operation of Bluetooth-enabled cell phones. When paired with a mobile phone, this headset

allows you to switch back and forth between the audio source and a phone call. The audio source for this

headset can be any audio device that is Bluetooth-enabled to comply with A2DP (Advanced Audio

Summary of content (5 pages)

PAGE 1
99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM 99003 Bluetooth Stereo Headphones with Playback Controls Class 2 CAUTION This product does not have a user-serviceable battery. Do NOT attempt to change the battery yourself. The battery used in this device may present a risk of fire or chemical burn if misused. Avoid extreme temperatures. Do not use this product on an airplane in transit, as it could disrupt communication. Federal Communications Commission (FCC) Statement 15.
PAGE 2
99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM Distribution Profile) specification. The cell phone must be compliant with Bluetooth specification version 1.1 or 1.2. Charging • • • • Charge the unit for a minimum of 12 hours before first use. Use the enclosed USB charging cable or the AC Adapter to fully charge the headphones. The red LED indicator will stay on constantly when charging. The headphones’ red LED charging indicator will shut off automatically when the battery is fully charged.
PAGE 3
99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM Pairing the headset to a cell phone 1. Once charged, power on the GE 99003 headset by press the power button for 3 seconds. The blue led on the left ear side of the GE 99003 should start blinking, indicating it is searching for a paired device. If the device (Bluetooth transmitter has not pair before, you need to let the 99003 headset in to pairing mode Æ press the power button for 6 seconds) 2.
PAGE 4
99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM Advanced Audio Controls These advanced stereo headphones also provide music playback control for use with Bluetooth-enabled audio devices offering this feature. If your audio device supports it, you can use the integrated controls on the headphones to control (play, pause, previous song, next song) your audio device.
PAGE 5
99003 Instructions, Revision a.1 11/14/2006 5:44:49 PM a. Some cell phones require manual activation and deactivation of the call via the phone’s interface. Specifications Standard Power Class Frequency Band Profiles Supported Audio Format Rx Sensitivity Sampling Rate SNR Bluetooth 2.0+EDR Class 2 Antenna Working Distance embedded antenna 2.402~2.480 GHZ unlicensed ISM band AVRCP, A2DP, Headset and Hands Free Profiles SBC < 0.