User Manual
Power
inserter
INTRODUCTION:
Thank you for purchasing the GE branded Signal Finder
Antenna. This antenna has a built-in signal finder to help you
position the antenna in the best location and orientation to
receive the most TV stations available.
Please read this manual completely before you install the
antenna and begin use.
IMPORTANT SAFETY INSTRUCTIONS:
• USE only indoors.
• DO NOT install in wet locations or locations that
can get wet.
Features:
• Signal Finder Technology
• VHF/UHF/HDTV
• Wall/table mountable
• Stylish slim profile
• Low-noise amplifier
Package Contents:
• Antenna
• Power inserter
• Power adapter
• Antenna stand
• Wall mounting kit
• User’s manual
Wall-mounting kit Power adapter
Antenna stand
Antenna
Power inserter
ANTENNA ASSEMBLY & INSTALLATION:
1. Remove antenna from package, place antenna in
desired location.
2. Connect the antenna to the TV.
3. Connect the power adapter to the power inserter.
Antenna
TV
Coaxial
cable
AC/DC power
adaptor
4. Plug the power adapter into an AC outlet.
5. Use the signal finder meter to find the best position for
your antenna. Slowly rotate the antenna to find the
position with the highest signal strength. This is the
position where the most blue LEDs are lit on the top row
followed by the most blue LEDs on the bottom row.
READ IT OR WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit https://goo.gl/Jn8vV3