Model 99004 Class 1 Home Stereo Transmitter & Receiver User Manual Vers.
FCC Information: The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Using the Product Thank you or choosing the GE 99004 Stereo Receiver & Transmitter. This device provides users with the ability to receive or transmit stereo audio via Bluetooth® wireless technology. • Receive Mode: The audio source can be any device that is Bluetooth® enabled to comply with the A2DP (Advanced Audio Distribution Profile) specification. Examples would include a computer with a music library or an MP3 player with Bluetooth® transmission technology.
Pairing the GE 99004 to a Bluetooth® Enabled Device Receiving Mode: 1. Make sure the transmitting device (a laptop computer or other audio device transmitting via Bluetooth®) is turned on and in transmission mode. See the owner’s manual of the other device for any product specific instructions. 2. Turn on the Audio/Video receiver and select the appropriate input. 3. Set the GE 99004’s Receive/Transmit switch to Receive and turn it ON.
3. Set the GE 99004’s Receive/Transmit switch to Transmit and turn it ON. When powered on, the 99004 will search for a Bluetooth® receiver and if it has already been paired with the receiving device, automatically connect. If the devices have not been paired previously, press the front panel “pairing” button (with Bluetooth® logo) to pair the devices and link them. The GE 99004’s Pairing LED will flash quickly during this process and stay ON when pairing is complete. When unlinked, the LED will blink slowly.
Troubleshooting 1. Why can’t I create a connection to the 99004 in Receive mode? a. Make sure the transmitting device is fully powered (battery has full charge or AC powered). b. Verify that the 99004 is within the specified range of (30 feet / 10 meters for Class 2 devices or 300 feet / 100 meters for Class 1 devices) from the audio source and that the audio source is transmitting via Bluetooth®. c. Check to see if any other Bluetooth® device is connected to the 99004.
d. Turn off the 99004 and all receiving devices. Power on the 99004, then power on the receiving devices and try connecting again. e. Ensure you have the correct music source selected on the stereo and that the volume is properly adjusted. Specifications Standard Bluetooth® 2.0 compliant Power Class Class 1 Frequency Band 2.402~2.480 GHZ unlicensed ISM band Profile Supported A2DP, AVRCP Audio Format SBC Rx Sensitivity < 0.
DISCLAIMER While every effort has been made to ensure that the information in this manual is accurate and complete, no liability will be accepted for any errors and/or omissions made. The manufacturer reserves the right to make changes and improvements to the specifications and features of the hardware and firmware of the products described in this document without prior notice.