SDS

03/25/2015Revision:
03/25/2015Printed:
Page: 4
Jasco Premium Paint and Epoxy Remover
SAFETY DATA SHEET
03/08/2015Supersedes Revision:
Epinephrine and other sympathomimetic drugs may initiate cardiac arrhythmia in
individuals exposed to this material. This material is metabolized to carbon monoxide.
Consequently, elevations in carboxyhemoglobin as high as 50% have been reported,
and levels may continue to rise for several hours after exposure has ceased. Data in
experimental animals suggest there is a narrow margin between concentrations causing
anesthesia and death. Adrenalin should never be given to a person overexposed to
methylene chloride.
5. FIRE FIGHTING MEASURES
Flash Pt:
NP
Self-contained respiratory protection should be provided for fire fighters fighting fires in
buildings or confined areas. Storage containers exposed to fire should be kept cool with
water spray to prevent pressure build-up. Stay away from heads of containers that have
been exposed to intense heat or flame.
Fire Fighting Instructions:
No flash to boil.
Contact of liquid or vapor with flame or hot surfaces will produce toxic gases and a
corrosive residue that will cause deterioration of metal.
Vapors are heavier than air and will tend to collect in low areas.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: No data. UEL: No data.
Use carbon dioxide, dry powder, water spray, or foam.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
6. ACCIDENTAL RELEASE MEASURES
Isolate the immediate area. Prevent unauthorized entry. Eliminate all sources of ignition
in area and downwind of the spill area. Stay upwind, out of low areas, and ventilate
closed spaces before entering. All equipment used when handling this product must be
grounded or non-sparking. Do not touch or walk through spilled material. Stop leak if
you can do so without risk. Prevent entry into waterways, sewers, or confined areas. A
vapor suppressing foam may be used to reduce vapors. Absorb or cover with dry earth,
sand, or other non-combustible material and transfer to compatible containers.
Steps To Be Taken In Case
Material Is Released Or
Spilled:
7. HANDLING AND STORAGE
Read carefully all cautions and directions on product label before use. Since empty
container retains residue, follow all label warnings even after container is empty.
Dispose of empty container according to all regulations. Do not reuse this container.
Avoid contact with eyes, skin, and clothing. Wash thoroughly after handling. A source of
clean water should be kept in the immediate work area for flushing of the eyes and skin.
Keep away from heat, sparks, flame, and any other source of ignition.
Do not smoke when anywhere near this material.
Ground and bond containers when transferring material.
Do not use in confined spaces, basements, bathrooms, etc, where vapors can build up
and explode if ignited by an ignition source.
Precautions To Be Taken in
Handling:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format