SDS

03/25/2015Revision:
03/25/2015Printed:
Page: 6
Jasco Premium Paint and Epoxy Remover
SAFETY DATA SHEET
03/08/2015Supersedes Revision:
Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
A source of clean water should be available in the work area for flushing of the eyes and
skin.
Wash hands thoroughly after use.
Do not eat, drink, or smoke in the work area.
Before reuse, thoroughly clean any clothing or protective equipment that has been
contaminated by prior use.
Discard any clothing or other protective equipment that cannot be decontaminated, such
as gloves or shoes.
Work/Hygienic/Maintenance
Practices:
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical States:
[ ] Gas [ X ] Liquid [ ] Solid
Melting Point:
No data.
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
NP
Explosive Limits:
LEL: No data. UEL: No data.
Specific Gravity (Water = 1):
1.138
Density:
9.2 - 9.5
Viscous opaque to clear
Appearance and Odor:
Vapor Pressure (vs. Air or
mm Hg):
No data.
Vapor Density (vs. Air = 1):
> 1
Evaporation Rate:
< 1
Solubility in Water:
Slight
Percent Volatile:
97.33 % by weight.
VOC / Volume:
22.7000 % WT
pH:
10.0 - 10.5
10. STABILITY AND REACTIVITY
No data available.
Conditions To Avoid -
Instability:
Unstable [ ] Stable [ X ]
Stability:
Incompatible with strong oxidizing agents; bases; strong caustics; strong acids; oxygen;
nitrogen peroxide; reactive metals such as aluminum and magnesium; sodium;
potassium; and nitric acid.
Incompatibility - Materials To
Avoid:
Decomposition may produce carbon monoxide and carbon dioxide, hydrogen chloride,
chlorine gas, and small quantities of phosgene.
Hazardous Decomposition Or
Byproducts:
Will occur [ ] Will not occur [ X ]
Possibility of Hazardous
Reactions:
No data available.
Conditions To Avoid -
Hazardous Reactions:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format