SDS

10/23/2017Revision:
10/23/2017Printed:
Page: 4
Jasco Fiberglass Paint Remover
SAFETY DATA SHEET
4. FIRST AID MEASURES
INHALATION
If user experiences breathing difficulty, move to air free of vapors. Administer oxygen or
artificial respiration until medical assistance can be rendered.
SKIN CONTACT
Immediately wash with soap and large quantities of water. Seek medical attention if
irritation from contact persists.
EYE CONTACT
Flush with large quantities of water, remove any contact lens, and continue flushing with
water for at least 15 minutes, then seek immediate medical attention.
INGESTION
Call your poison control center, hospital emergency room or physician immediately for
instructions to induce vomiting.
Emergency and First Aid
Procedures:
POISON. THIS PRODUCT CONTAINS METHANOL AND METHYLENE CHLORIDE.
This product contains methanol which can cause intoxication and central nervous system
depression. Methanol is metabolized to formic acid and formaldehyde. These
metabolites can cause metabolic acidosis, visual disturbances and blindness. Since
metabolism is required for these toxic symptoms, their onset may be delayed from 6 to
30 hours following ingestion. Ethanol competes for the same metabolic pathway and
has been used to prevent methanol metabolism. Ethanol administration is indicated in
symptomatic patients or at blood methanol concentrations above 20 ug/dl. Methanol is
effectively removed by hemodialysis.
Note to Physician:
See Potential Health Effects.
Signs and Symptoms Of
Exposure:
5. FIRE FIGHTING MEASURES
Flash Pt:
10.00 F Method Used: Setaflash Closed Cup (Rapid Setaflash)
Self-contained respiratory protection should be provided for fire fighters fighting fires in
buildings or confined areas. Storage containers exposed to fire should be kept cool with
water spray to prevent pressure build-up. Stay away from heads of containers that have
been exposed to intense heat or flame.
Fire Fighting Instructions:
DANGER! FLAMMABLE. KEEP AWAY FROM HEAT, SPARKS, FLAME AND ALL
OTHER SOURCES OF IGNITION. VAPORS MAY CAUSE FLASH FIRE OR IGNITE
EXPLOSIVELY. VAPORS MAY TRAVEL LONG DISTANCES TO OTHER AREAS AND
ROOMS AWAY FROM WORK SITE. Do not smoke. Extinguish all flames and
pilot lights, and turn off stoves, heaters, electric motors and all other sources of ignition
anywhere in the structure, dwelling or building during use and until all vapors are gone
from the work site and all areas away from the work site. Keep away from electrical
outlets and switches. Beware of static electricity that
may be generated by synthetic clothing and other sources.
Flammable Properties and
Hazards:
Autoignition Pt:
No data.
Explosive Limits:
LEL: 1.2 % UEL: 36 %
NFPA Class 1B
Carbon dioxide, dry powder or alcohol resistant foam. Water spray may be used, but
may be ineffective at extinguishing the fire.
Suitable Extinguishing Media:
None known.
Unsuitable Extinguishing
Media:
Licensed to W.M. Barr and Company: MIRS MSDS, (c) A V Systems, Inc.
GHS format