User's Manual

8. RECHARGEABLE BATTERY
8.1 Insertion and Removal
① Lock Lever
② Rechargeable Battery
③ Charger
④ PWR LED
[Picture I-13. Battery Insertion/Removal]
; Removal: Push up the lock lever on the back of the main body as seen in the
above picture, then slightly pull the upper part of the battery.
; Charging: Insert the battery as seen in the above picture to begin charging. In
case the insertion is properly done, the PWR LED turns on.
(Red, Green, or Yellow light comes on according to the charging
conditions.)
; Insertion: Insert the battery so that the main body and contact pin terminal of
the battery can be in contact with each other. Insert it by pressing inward
after the projecting part of the lower part of battery and the two grooves
on the lower battery insertion part of the main body have been in contact