User Manual
Table Of Contents
- HPT204BT*
- Table of Contents
- Preface
- FCC Class A Compliance
- Canadian Emissions Labeling Requirements
- Industry Canada
- WEEE Directive
- Introduction
- Configuration
- Command Line Interface
- Specifications
- VHF Radio Usage
- Safety Warnings
- Warranty Terms
Configuration
Antenna Installation
Power supply requirements
15www.javad.com
4. Place the antenna on the pole.
Use coaxial cable and connectors that are impedance-matched with the radio equipment, and make sure
to use the shortest length of cable to move the signal between the radio and the antenna:
• p/n 14-578115-01 Accessory Ant Cable BNC/Magn Mount, 12ft
1
• p/n 14-578116-01 Accessory Ant Cable BNC/Mini-Magn Mount, 12ft
1
• p/n 14-578117-01 Accessory Ant Cable BNC/Pole Mount, 12ft
1. For this type of antenna a metal surface, e.g. car’s roof, serves as ground plane.
1 Unscrew the
2 Place the Ground Plane between
3 Attach to the
cone-shaped cable part
cable parts and screw all together
+
VHF Antenna
VHF Antenna
Ground Plane