User Manual
Table Of Contents
- HPT204BT*
- Table of Contents
- Preface
- FCC Class A Compliance
- Canadian Emissions Labeling Requirements
- Industry Canada
- WEEE Directive
- Introduction
- Configuration
- Command Line Interface
- Specifications
- VHF Radio Usage
- Safety Warnings
- Warranty Terms
Configuration
Loading New Firmware
Simplex Protocol
21www.javad.com
2.7. Loading New Firmware
The modem uses ModemVU to load firmware onto the modem. For more information, refer to the
ModemVU Software Manual, available on the JAVAD GNSS website.
1. Download the new firmware package to your computer.
2. Connect your modem and computer, as described in “Connecting HPT204BT and Computer” on
page 17.
3. Start ModemVU. Select the HPT204BT and than the COM port and click Ok (see “Configuring
HPT204BT” on page 18).
4. Click the Serial Interface &Tools tab;
5. Click Download Firmware button (Figure 2-6).
Figure 2-6. Serial Interface & Tools tab
6. Open the required firmware folder. Select the .xmd file and click OK.
7. Wait until the new firmware version process will be complete.
8. Click FileDisconnect, then FileExit to quit ModemVU.