User Manual
Table Of Contents
- HPT204BT*
- Table of Contents
- Preface
- FCC Class A Compliance
- Canadian Emissions Labeling Requirements
- Industry Canada
- WEEE Directive
- Introduction
- Configuration
- Command Line Interface
- Specifications
- VHF Radio Usage
- Safety Warnings
- Warranty Terms
Specifications
Connector Specifications
Receiver Specifications
36 www.javad.com
This connector provides DB15 connectivity for the HPT204BT with DTE. About using and configuration
RS-485 please contact JAVAD GNSS support.
Table A-5. DB15 Connector Specifications
External Antenna RF Connector
The external antenna connector type is a BNC RF connector AEP Connectors p/n 6501-7051-003.
Number Signal Name Dir Details
1 DCD_OUT O Data Carrier Detect (RS-232)
2 DTR_OUT O Data Terminal Ready (RS-232)
3 RX+/CTS_IN I Receive Data positive line (RS-422)/
Clear to Send (RS-232)
4 RX-/RX_IN I Receive Data negative line (RS-422)/
Receive Data (RS-232)
5 PWR_IN I +9 to +36 VDC Power Input
6 USB_PWR I Power Input line (USB)
7 Ground - Power Ground
8 PWR_IN I +9 to +36 VDC Power Input
9 DSR_IN I Data Set Ready (RS-232)
10 TX+/RTS_OUT O Transmit Data positive line (RS-422) /
Request to Send (RS-232)
11 TX-/TX_OUT O Transmit Data negative line (RS-422) /
Transmit Data (RS-232)
12 Ground - Power Ground
13 USB_D+ I/O Positive line (USB)
14 USB_D- I/O Negative line (USB)
15 Ground - Power Ground