User's Manual

UDEE / UDRE - 332170A revision02 - 25 -FrEnDePRELIMINARY
- For maximum safety when using the radio remote control, we recommend that the
operator carefully follow the instructions provided in this manual.
- The operator must be appropriately trained and certified to operate machines by
radio remote control.
- The operator must have uninterrupted visibility of the manoeuvre which he is
performing. When the operator's direct field of view is inadequate, the lifting machinery
must be equipped with auxiliary devices to improve visibility.
When several machines are being moved simultaneously, the equipment must be
fitted out to limit to consequences of a possible collision.
- To avoid any risks of electrocution, don't open the receiver case when powered.
- Never leave the transmitter lying around anywhere, in particular when it is powered
up.
- Never leave the radio control transmitter on the ground or on a metal surface. If doing
so becomes indispensable, press the stop palmswitch on the radio control.
- If several radio controls are used at the same site, different radio frequencies should
be used, spaced by at least two channels (for example, channels 5, 7, 9, etc.). The
more space there is between the chosen radio channels, the less the risks of
disturbance are.
- For safety reasons, remove the electronic key when not in use. Store it in a safe and
tracked down place.
- Do not forget to recharge the battery pack when discharged.
- In the event of a malfunction, immediately shut down the installation by pressing the
stop palmswitch on the transmitter and remove the electronic key.
- Service your equipment and perform all the periodic checks as may be required by
the intensity with which your equipment is used. Follow necessarily the instructions of
cleaning described in the chapter "Servicing".
A radio remote control is considered as a machine control device and as a safety
component used to stop a machine as specified by the EEC Machinery Directive.
All applicable rules must therefore be observed to ensure safe, correct operation
of such devices.
4- Use and operation
4.1- Reminder : General safety rules