CONTENT Preface........................................................................................... 1 Notice............................................................................................. 1 Protection of Power Cable ............................................................. 2 Precautions and Maintenance........................................................ 2 Instructions for Using the Built-in Battery ....................................... 3 Precautions ...........................
Preface Thanks for choosing our portable DVD player. Please read this instruction manual carefully before using and keep it properly for later reference. This is a new DVD player with perfect sound and display output. It is suitable to be used in office(s), indoor, hotel(s), car(s), and so on. Notice Non-professional staffs do not touch the laser lens.
Protection of Power Cable 1. To disconnect the AC power cord, pull the plug out from the connector. 2. Please do not place the AC power cord close to any heat source. 3. Please do not place heavy objects on the AC power cord. 4. Please do not disassemble and repair AC power cord by yourself. 5. This player is class-I laser product and with “Class-I” remark. 6. This product contains a low-power laser device.
12. The image quality might be reduced if there are muddiness or scratch on the LCD screen. Instructions for Using the Built-in Battery Precautions High-capacity rechargeable lithium battery is built-in in this player, it is strictly forbidden to take the battery apart by your own. Seek for professional technicians’ assistance to replace the battery for you. 1. Please do not throw the battery into fire or to any heat area; please also do not store the battery in any area that is having high temperature. 2.
Appearance Instruction Function Keys on the Player 1. Mode: Function mode switch (DVD/AV/TV switch). 2. USB/SD: USB/SD switch. 3. SETUP: Press this button to set the function of the DVD player. 4. : Press this button to move the cursor upwards and TV Channel increase. 5. : Press this button to move the cursor downwards, and TV Channel decrease. 6. : Press this button to move the cursor leftward. 7. : Press this button to move the cursor rightwards. 8.
13. : Press this button to Play / Pause. 14. VOL- : Decrease the volume. 15. VOL+ : Increase the volume. 16. MENU : Menu setup for displaying. 17. CD Door Open / Close Right Side of the Player 1. Power Input: DC IN 14.5V 2. Power Button: On / Off 3. AV IN: External AUDIO / VIDEO input 4. AV OUT: AUDIO / VIDEO output 5. Earphone port 6. SD/MMC Card slot 7. USB: USB socket Left Side of the Player 1. GAME1/2: Game Control Pad socket 2. VGA: Connect with LCD monitor by VGA.
Front side of the Panel 1. Battery Charging Indicator Red light: Charging Yellow light: Full 2. Power Indicator Blue light: On 3. Remote Control Sensor Remote Control Introductions Installation of Remote Control Battery 1. Flip to the back of the remote control and remove the lid. 2. According to the battery polarity position, correctly insert two sections of AAA batteries. 3. Put back and close the lid accordingly. Precautions 1. Do not use rechargeable batteries. 2.
Remote Control Appearance 1 2 3 4 6 7 5 8 9 10 12 14 15 11 13 16 17 18 22 19 20 21 23 24 25 26 27 1 POWER 2 OSD 3 DVD/USB Card 4 MODE 5 Number Buttons 6 AUDIO 7 SUBTITLE 8 ABGLE 9 TITLE / PBC 10 RETURN 11 ZOOM 12 SETUP 13 MENU 14 ENTER 15 Direction Buttons 16 GOTO 17 Play/Pause 18 Stop 19 SLOW 20 REPEAT 21 MUTE 22 VOL+ 23 VOL- 24 Previous 25 Next 26 Fast Reverse 27 Fast Forward 7
1. POWER: Power switch of DVD player. 2. OSD: Display the working status of DVD. 3. DVD/USB Card: Press this button to switch among DVD/USB/CARD interfaces in the DVD mode. 4. MODE: Press this button to switch the different functions between DVD/TV/AV modes. 5. 6. Number Buttons: Number buttons can be used to select songs or TV channels. AUDIO: Press [Audio] to switch among multiple audio languages. This function works only when the disc supports multiple audio languages. 7.
15. Direction Buttons: Left, Right, ▲Up (TV mode CH+), ▼Down (TV mode CH-). 16. GOTO: Press [GOTO], according to different types and contents of discs, the display on the screen is as the following: Press [GOTO] once when the disc is being played back, TV screen shall display the disk type, the number of titles/sections (songs) in the disc, the title number/section (song) number of the currently playing item, and play time of the section (song).
Basic Operation Power Operation Connect the power adapter with either 220V or 110V power supply, switch the [Power] to ON, and wait for 3 seconds to turn on the device. The device displays the latest shutdown state. Switch to the mode you prefer by mode button. Press [Setup] to enter setting menu interface, select the appropriate function from the menu setting. The item in brighter color indicates as the selected one, and press [Enter] to confirm.
wide screen images are being played. z 16:9 (wide screen): Applicable for wide-screen TV. Note: 1) The play effect is relevant to the recorded image ratio of the disc, while some discs can not be played according to the selected image sizes. 2) For video disc only recorded in 4:3 mode, its playing ratio could only be 4:3 no matter which screen image size ratio is set. 3) The selection of screen image size ratio should be corresponded to the screen size ratio of the TV in service. 5.
6. Audio Setup Key: Press [Direction Button] to move the sliding bar to select the Key. Language Setup 1. OSD Language: Enter OSD Language (On Screen Display language) setup menu, and press [Direction Button] to select the OSD Language you want, then press [Enter] for confirmation. There are 8 options under this item for selection: English / Chinese / German / Spanish / French / Portuguese / Italian / Russian. 2.
CD Copy Function Play MP3/JPEG Disc Play MP3 Disc Put in MP3 disc, the DVD player will automatically search all the directories in MP3. When finishing searching, it will play the first directory in MP3 (if the directories in the same type are not placed in order, it will play the first directory), and then play the first song in the directory (the cursor stops at “01”). Press [Up / Down] to select any directory in the directory menu on the left side, and press [Enter] for confirmation.
Select a picture in the JPEG directory menu and press [Play] to play pictures in order. Read USB disc and SD/MMC Cards 1. Insert USB disc into the USB interface on the upper right corner or Insert the card (SD/MMC) into the card slot of the player. 2. Turn on the power - play. 3. You can download MP4 / MP3 / JPG / VCD files into a USB disc to play back. Note: 1) USB disc and SD/MMC Cards must be played at no disc state so that the device can detect the USB disc, or SD/MMC cards and then play.
Digital TV Functions System Setup When using the DVB-T TV function, make sure the antenna and unit (Portable DVD) are connected, and the unit is switched on. If finished using the DVD, AV IN or AV OUT function, press "MODE" key to enter the Digital TV function. If the database hasn’t television programs, the system interface will appear as follows: At this point, press the "SETUP" key to enter SETUP menu.
password "8888", and then it will enter the following interface. If you do not want to delete, press "Return or SETUP" key to return the previous menu. ¾ In this interface, press / buttons to move the cursor to the option you want to delete, press "ENTER" key to enter the delete option, press the / buttons to select "YES" or "NO" and press ENTER to confirm. 2.
2.1 Area Search: Regional search program is a smart way to facilitate the program searches, it can choose according to your country (region), and the search of the area or region of the country shows all the channels. / In INSTALLATION interface, use the key to move the cursor to the AREA SEARCH option, press the ENTER key to enter the Channel search: ¾ In the program search process you can stop the program search by pressing "back" button.
B. Bandwidth: Sets the current scanning frequency transmission of broadband, you can press / buttons to select 6MHz, 7MHz, 8MHz, the machine defaults to 8 MHz. 2.3 Auto Search: Search for any band program; ¾ In INSTALLATION interface, use the / key to move the cursor to the Auto SEARCH option, press the ENTER key to enter the Channel search: ¾ In the auto search program, you can set the following items: A. Start Freq (KHz) initial frequency: you can use the remote control keys 0-9 to modify. B.
3.1 OSD: Through this option, you can set display mode of user interface what you like; ¾ In the Configuration interface, use the / key to move the cursor to the OSD options, press ENTER key to enter OSD setup options: Operation： Use the / keys to select the options you want to set, use / make changes, press the ENTER key to confirm your choice: 1) OSD: This option allows you to change the user interface with 5 colors.
6) 1st Audio Language：This option allows you to change the 1st Audio Language according to your needs: English / S. Chinese / T. Chinese/ French / German / Italian / Spanish / Swedish / Portuguese / Finnish / Dutch/ Russian/ Greek 7) 2nd Audio Language：This option allows you to change the 2nd Audio Language according to your needs: English / S. Chinese / T.
6) HUE: Change the HUE of display, you can choose -6 to 6. The system defaults to 0. 7) Saturation: Change the Saturation of display, you can choose -6 to 6. The system defaults to 0. ¾ Click "Return or SETUP" key return previous menu. 3.
Operation Use the / keys to select the options you want to set, use / make changes, press the ENTER key to confirm your choice: 1) Time Mode: Set the time mode to AUTO or MANUAL. The system defaults to AUTO. 2) Date: Before change the settings, please set the Time Mode to MANUAL. Then press / / / to set the date. 3) GMT Offset: Before change the settings, please set the Time Mode to AUTO, Then press / / / to set the time zone.
3) The cursor moves to the "Confirm password" option, enter the new 4-digit password again. If it is confirmed not to be the same as the new password, the system will be prompted to enter a new password. If confirmed to be the same, the Parental Lock settings interface will automatically disappear. 4. Software Upgrade The system supports software upgrade by USB. 5. Factory Default This feature allows you to set the DIGITAL TV back to the factory default state.
Trouble Shooting Problems No power/not charging Possible solution 1. Check if the power plug is correctly connected with the power socket. 2. Check if the power switch is on. 1. Check if the power switch is on. 2. Check if the disc is being inserted; the disc side with label should be faced up. 3. Check if the disc is being placed upside down. Disk cannot be read 4. Please change or clean the disc if it is damaged or dirty. 5.
Specifications DVD Technical Parameter Support format DVD/SVCD/VCD/CD/CD-R/RW/JPEG/DVD+R/-R/MP3/MP4/DIVX Other support medias USB/SD/MMC Card Shock proof function DVD: 3: seconds VCD/CD: 10 seconds MP3: 90 seconds AUDIO: 2.0V±0.2 Speaker: 8ohm/1.5W AUDIO output level Earphone output is less than 15mw Frequency response 20HZ~20KHZ Audio signal ratio (S/N) ≥50dB Dynamic range ≥50dB Video output level 1.0V±0.
EC Declaration of Conformity The product complies with the protective requirements of European Directives 2004/108/EC. The conformity declaration for this product is available under www.jay-tech.de. Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.
