IMPORTANT INSTRUCTIONS SAFETY INSTRUCTIONS WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR SERIOUS PERSONAL INJURY: This product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Situate this product away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
CAUTION! TO REDUCE THE RISK OR PERSONAL INJURY OR PRODUCT/PROPERTY DAMAGE: This product is intended solely for non-commercial, non-industrial, personal use as a television. Do not use this product for any other purpose. Do not subject the product to violent shocks, extreme temperatures, or lengthy periods or direct sunlight. Keep the product away from magnetic objects, motors, and transformers. Do not use outdoors in inclement weather.
TABLE OF CONTENTS GETTING STARTED IMPORTANT INSTRUCTIONS ......................................................................................... 1-2 FEATURES ......................................................................................................................... 4 GENERAL PARTS ............................................................................................................ 5-6 REMOTE CONTROL.......................................................................................
FEATURES 81 cm (32") TFT DISPLAY This player has a built-in 81 cm (32”) TFT display to provide clear vision and low radiation.
GENERAL PARTS MAIN UNIT Front View 1. TFT display screen 2. Remote control sensor 3. Power indicator: In standby mode the indicator light will display red color; when switching on the unit the indicator light will display blue color. 4. Stand holder 5. VOL +/- button: To increase/decrease the volume level or move left/right. Side View 6. CH +/- button: To select next/ previous channel or move up/down. 7. MENU button: To enter menu setting page. 8. SOURCE button: To select the input source. 9.
GENERAL PARTS Back View 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 6 EARPHONE output terminal HDMI1/HDMI2 input terminals RF input terminal- To connect the external antenna. PC AUDIO input terminal COAXIAL output terminal SCART input terminal CI input terminal USB input slot- For multimedia files playback.
REMOTE CONTROL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. POWER: To set the unit in standby mode; press it again to switch it on. MUTE: To mute the sound. AUTO: To adjust the screen automatically (in PC/VGA mode). NUMBERIC BUTTONS (0-9): To input the number information, such as channel number and so on. -/--: To select one digit, two digits and three digits.
REMOTE CONTROL PREPARATION BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and – terminals are positioned as indicated in the battery compartment (Fig1). SERVICE LIFE OF BATTERIES The batteries normally last for one year although this depends on how often the remote control is used. If the remote control fails to work even when it is operated near the player, replace the batteries. Use two size AAA dry batteries.
BASIC CONNECTION Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC power adaptor. Read through the instructions before connecting other equipment. CONNECTING TO AC POWER SOURCE Main unit To power outlet CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
HDMI CONNECTION Use HDMI cable (not included) to connect the unit with other devices to receive high-definition multimedia signal. NOTE: The users can connect up to three HDMI devices to this unit at same time.
EARPHONE CONNECTION Earphone cable (Not included) PC/VGA CONNECTION VGA cable (Not included) Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a monitor.
COAXIAL CONNECTION Use coaxial cable (not included) to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output. USB CONNECTION Insert an USB memory device to playback MOVIE / MUSIC / PHOTO / Multimedia files. COMPOSITE AV CONNECTION AV cable (Not included) For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable (not included) to connect the unit with other devices.
YPBPR CONNECTION YPbPr cable (Not included) Back of DVD/VCR INSERT A CI CARD CI slot MAKE SURE ALL THE EQUIPMENTS AND POWER CORD ARE CONNECTED PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF OPERATIONS.
BASIC OPERATIONS Press POWER button on unit or remote control to power ON the unit (indicator will glow blue); press it again to power OFF (standby mode) the unit (indicator will glow red). Press SOURCE button on unit or remote control to set the unit in ATV or DTV mode. SELECT DESIRED PROGRAM - Press CH+ button to play next channel. - Press CH- button to play previous channel. - Press number buttons on remote control directly to select desired program.
AUDIO SETTING - In DTV mode: Press AUDIO button on remote control to enter Audio Languages menu page directly, then press navigation buttons to select desired option. In ATV mode: Press AUDIO button to select available soundtrack. INFORMATION DISPLAY Press DISPLAY button on remote control to display information of current program. TV GUIDE (FOR DTV MODE ONLY) Press EPG button on remote control to enter below menu page: - Press INDEX button on remote control to display index.
QUICK SELECT - Press OK button on remote control to enter Channel List page directly. Press UP or DOWN navigation button to select desired channel. Press OK button to confirm selection. TELETEXT Press TEXT button on remote control to view the available teletext information. TV/RADIO (FOR DTV MODE ONLY) Press TV/RADIO button on remote control to switch the unit between TV and radio mode. SUBTITLE - Press SUBTITLE button on remote control to enter Subtitle Language page directly.
- again to erase it from the play list. Press button to start playing. Press EXIT button to return to previous menu page. 1. PHOTO During PHOTO playback: - Press DISPLAY button to display/hide the tool bar. - Press LEFT or RIGHT navigation button to select preferred option in the tool bar and press OK button to confirm selection. - Press button to pause/start playing. - Press button on remote control to play previous photo in the play list.
During MUSIC playing: - Press LEFT or RIGHT navigation button to select preferred option in the tool bar and press OK button to confirm selection. button to pause/start playing. - Press - Press button on remote control to play fast backward. - Press button on remote control to play fast forward. - Press button on remote control to play previous audio file in the play list. - Press button on remote control to play next audio file in the play list. - Press GREEN button to remove all the files from play list.
4. TEXT During TEXT playing: - Press DISPLAY button to display/hide the tool bar. - Press LEFT or RIGHT navigation button to select preferred option in the tool bar and press OK button to confirm selection. - Press button on remote control to display previous page. - Press button on remote control to display next page. - Press button on remote control to play previous text file in the play list. - Press button on remote control to play next text file in the play list.
MAIN MENU The unit contains different setting menus. Once the initial programming is entered, it will be remained in the memory until it is changed, and the unit can always be operated under the same conditions. This setting will be remained in the memory until the settings are changed even after setting the player to standby mode. Common procedure for initial settings - Press MENU button on unit side or remote control to display the main menu.
If above settings are finished, press OK button to confirm selection and enter Channel Tuning page. Then the unit will automatically search all the available ATV and DTV channels. - If you want to skip ATV or DTV channel tuning, press MENU button and use LEFT/RIGHT navigation buttons to select YES; select NO to continue tuning. If you want to exit all the tuning, press EXIT button and use LEFT/RIGHT navigation buttons to select YES; select NO to continue tuning. 1. CHANNEL 1.
Country Press LEFT or RIGHT navigation button to select the country that you are living in. Tune Type Press LEFT or RIGHT navigation button to select the tune type. Once above settings are finished, press OK button to start auto channel scanning. 1.2 DTV Manual Tuning Press UP or DOWN navigation button to select DTV Manual Tuning, then press OK button to enter below page: Press LEFT or RIGHT navigation button to select channel, then press OK button to search programs. 1.
1.4 Programme Edit - Press RED button on remote control to enter Delete Mode. Then press UP or DOWN navigation button to move the cursor and press RED button again to delete a channel. - Press GREEN button on remote control to enter Rename Mode. Then press UP or DOWN navigation button to move the cursor and press LEFT or RIGHT navigation button to adjust the value. NOTE: Rename function is available only for analog channels. - Press YELLOW button on remote control to enter Mode.
2. PICTURE 2.1 Picture Mode Available options: Standard, Mild, User, Dynamic. NOTE: If the value of Contrast, Brightness, Color or Sharpness has changed, Picture Mode will turn to User automatically. 2.2 Contrast The value of contrast can be adjusted from 0-100. 2.3 Brightness The value of brightness can be adjusted from 0-100. 2.4 Color The value of color saturation can be adjusted from 0-100. 2.5 Sharpness The value of sharpness can be adjusted from 0-100. 2.
2.8 Red The value of red can be adjusted from 0-100. 2.9 Green The value of green can be adjusted from 0-100. 2.10 Blue The value of blue can be adjusted from 0-100. NOTE: If the value of Red, Green or Blue has changed, Color Temp will turn to User automatically. 2.11 Aspect Ratio Available options: Panorama, 4:3, 16:9, Zoom1, Zoom2. 2.12 Noise Reduction Available options: Off, Low, Middle, High. 2.13 Screen (for PC mode only) 3. SOUND 3.
3.3 Bass This item is used to adjust the level of lower-pitched sounds from 0-100. 3.4 Balance This item is used to adjust the audio output between left and right speakers from -50 to +50. 3.5 Auto Volume This item is used to set Auto Volume on/off. 3.6 Surround Sound This item is used to set Surround Sound on/off. 3.7 SPDIF Mode Available options: Auto, PCM, Off. 4. TIME 4.1 Clock - If DTV scanning is not performed, or no available digital channel is present, the users can adjust the Clock manually.
4.2 Off Time This item is used to set the auto power off time. - Press UP or DOWN navigation button to select Repeat/Hour/Minute. Press LEFT or RIGHT navigation button to adjust the value. 4.3 On Time This item is used to set the auto power on time. - Press UP or DOWN navigation button to select desired item. - Press LEFT or RIGHT navigation button to adjust the value. NOTE: If no available channel is present, Channel will not be adjustable and it will display grey color. 4.
5. OPTION 5.1 OSD Language This item is used to select preferred On-Screen-Display language. 5.2 Audio Language 1st This item is used to select preferred First Audio Language. 5.3Audio Language 2nd This item is used to select preferred Second Audio Language. 5.4 Subtitle Language 1st This item is used to select preferred First Subtitle Language. 5.5 Subtitle Language 2nd This item is used to select preferred Second Subtitle Language. 5.
6. LOCK 6.1 Lock System Input the password by pressing number buttons on remote control to enter it. NOTE: The factory default password is “0000”. 6.2 Set Password Press number buttons on remote control to input “Please enter old password”, “Please enter new password” and “Confirm new password”. 6.3 Block Program - Press UP or DOWN navigation button to select the channel. Press GREEN button on remote control to lock/unlock a channel. 6.
ATV AND OTHER MODES - Press SOURCE button on unit side or remote control to select preferred input source. For menu operations in above modes, please refer to the menu operations in DTV mode. PC MODE - Power on your Personal Computer and connect it to this TV. Press SOURCE button on unit side or remote control to set the unit in PC mode. Press MENU button to display the main menu and use LEFT or RIGHT navigation button to select PICTURE.
MAINTENANCE Be sure to press POWER button to set the player to the standby mode and disconnect the power plug before maintaining the player. Wipe the player with a dry, soft cloth. If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust.
WALL MOUNTING Contact a professional for assistance when wall mounting your TV. We are not responsible for any damage to the product or injury to yourself, if you mount the TV on your own. Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric shock. Use standard M6 screws (12mm / 4 pieces) to mount this TV.
GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom Remedy No power. Insert the AC adaptor securely into the power outlet. No picture. Ensure that the equipment is connected properly. ● No sound. ● Distorted sound. ● Ensure that the equipment is connected properly. ● Ensure that the input setting for the TV and stereo system are correct. ● Adjust the master volume to a suitable volume by pressing VOL+/VOL- button.
EC Declaration of Conformity The product complies with the protective requirements of European Directives 2004/108/EC. The conformity declaration for this product is available under www.jay-tech.de. Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.
