User’s Manual Before operating this unit, please read this manual thoroughly and retain it for future reference.
Table of Contents: General Description of Function ...................................................................................... 1 Precautions...................................................................................................................... 1 System Requirements...................................................................................................... 4 Description of Outline and Button ..................................................................................
General Description of Function It is able to use the camera for a digital photo of maximum 5 mega pixels picture, and is able to shoot AVI short film. The camera is able to auto adjust exposure and color balance, and it has 4 x focusing function. The product can be used as a PC camera when connecting with computer. The contents covered in the manual were referred to the latest information when the manual was compiled. The screen display and illustration, etc.
It is required to operate camera regularly during long time storage. Please check whether the camera operates normally or not before using the camera again. If dirt or stain is accumulated on the camera or lens, it is required to use a piece of soft, clean and dry cloth to wipe it out lightly. If the camera or lens is stained with sand grain, it is available to blow it away lightly. Never use cloth to wipe. Otherwise, it may scrape the camera or lens surface.
digital camera or computer is accessing the memory card (i.e. read, write and format, etc.) 6. Touch the metal contact surface of the card with finger or metal subject. 7. The memory card outruns its service life (please purchase regularly a new memory card.
System Requirements System Requirements Operating System Microsoft® Windows® 98 SE, ME, 2000, XP, Vista 32-bit Central Processing unit Above Intel® Pentium 166MHz or CPU of equal performance Memory Above 128 MB Sound Card, Display Card The sound card and the display card shall support DirectX8 or higher version. CD Driver 4 times of speed or above Hard Disk Surplus space above 500 MB Other One standard USB 1.1 interface or USB 2.
Description of Outline and Button 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Lens Macro switch Shutter key Busy light Power key OK key Direction key: Up Down Right/LED switch Left/Self-timer Mode key Battery lid Speaker Wrist strap loop Wrist strap hole Zoom in key Zoom out key USB/TV out port LED light Self-timer light (Red LED) Tripod nut SD card slot 5
Start to Use 1. Install Battery 1. Open the battery lid 2. Put 3 pieces of AAA (LR03) batteries in according to the polarity instruction. 3. Insert the front end of the battery lid into the battery stack; press the back end of the battery lid and then push the battery lid inwards to allow the battery lid to closely attach the body.
2. Use SD Card 1. Push the SD card into the slot until it is completely inserted according to instructions. 2. Lightly press the card end inwards and the SD card will eject. 3. Choose Focus Mode Press the macro switch on the top of the body and then you can switch between the macro and normal focus. 1. Macro: it is suitable for shooting objects 15cm ~ 25cm away from the lens; when 2. Normal focus: it is suitable for shooting objects 1.
4. Adjust the Wrist Belt Length 1. Pull the magic sticker on the wrist belt. 2. Pull the nylon strap stuck on the magic sticker. 3. Adjust the bending length of the wrist belt. 4. Fasten the nylon strap on the magic sticker. 5. Fold and nip tightly the magic sticker.
5. Power on and off 1. Power on: press the power key for a while, light the screen and the unit will be power on. 2. Power off: press the power key once while camera is idle state, it will be power off. Auto power off: While the camera is idle for 1 minute, it will be power off automatically. The automatically power off time can be set to 1 / 3 / 5 minute in setup mode. 3. Low power: While the battery power is very low and LCD display icon “ ”, the camera will power off automatically 6.
7. Date and Time Settings: You can enter Setup menu mode to set the system date and time: At setting window, adjust the date or time by direction key: Up or Down for adjust, Right key for move the cursor, OK key for confirm, Left for exit setup mode. 8. Indicator Light: Busy light: the light will be illumed while the camera is busy (e.g. Recording movie, capture photo, some key was pressed, connecting to computer etc). LED light: to reinforce light intensity for recording.
9. Video Mode: Preview Mode 1. : Mode symbol, Indicate is video mode. 2. Auto: Indicate the White balance is auto mode. It can be set as Auto / Daylight / Cloudy / Fluorescent / Tungsten. 3. Metering mode: Center / Multi / Spot 4. 640 : Indicate is video resolution, it can be set is 640x480 / 320x240. 5. 00:01:08: time counter. It indicates recording time is 1 minute 8 seconds for movie. 6. SD card icon: that indicates there is one SD card being used. 7. Battery icon: That indicates the battery power level.
Shooting: 1. Switch on the camera by press Power key to enter preview mode; 2. Press Shutter key to start recoding movie; 3. If you want to stop recoding, press Shutter key again; and if the memory card full, it will stop recoding automatically. 4. You can do zoom in or zoom out operation during recording by Zoom key. Maximum digital zoom: 4X.
Video Menu At video preview mode, press OK key enter main menu: 13
14
10. Camera Mode: Preview Mode 1. : Mode symbol, indicate snap photo mode. 2. : Self-timer mode symbol. 3. Auto: Indicate the White balance is auto mode. 4. : Metering mode. 5. : Exposure mode. 6. : Image resolution mode. 7. : Image quality mode. 8. : Image counter (default is reduce). 9. : Self timer, indicate snap photo automatically after 10s. 10. : SD icon, it will be displayed while there is SD/MMC card was inserted. 11. : Battery icon. : Indicate the SD card was locked. 12.
Shooting: 1. Switch on the camera by press Power key to enter video preview mode; 2. Press Mode key once to switch to Camera preview mode; 3.
17
18
Self timer: Set the Driver mode is Self timer 2s or 10s at menu, then press Shutter key will time with beep, after 2 seconds or 10 seconds, the camera will snap one photo automatically Continuously take three photos: Set the Driver mode is Burst at menu, then press Shutter key will snap three continuously 19 photos
11. Playback Mode: Enter Playback Mode Press mode key continuously can enter Playback mode or press it twice to enter Playback mode after press Power key switch on the camera.
Thumbnail mode Press Zoom out key can enter thumbnail mode at playback mode: Note: : This icon indicates that is one AVI media file. : This icon indicates that is one JPG file with voice memo. You can press direction key to choose the desired image file, and press Zoom in key to exit this thumbnail mode return full screen mode.
Play AVI file Press Shutter key to start play the selected AVI files at playback mode, and you can press Shutter key again to stop playing.
Play JPG (with voice memo) file 1 Select the photo was added voice memo at playback mode; 2 Press Shutter key to start play the selected jpg(with voice memo) file: Press OK key to stop playing, UP key to pause/resume playing, 1 2 3 4 Playback mode icon Counter of image Voice Memo indicator Indicator of JPG file 5 Timer of playing 6 Control panel for playing 23
Playback menu: At Playback mode, press OK key enter main menu: Note: The locked files can not be deleted until unlock them or do the operation of format.
25
Add Effect for Image Resize Function: The image size selected must be smaller than the size of current photo.
27
Add Voice Memo for Image: The time of Voice Memo can be recorded about 30s only.
12. Setup Mode: Press OK key at preview or playback mode and then press direction of Right key once will enter Setup mode. You can choose the menu item by Up or Down key, enter or exit submenu by Left or Right key, and confirm setting by OK key.
De German Fr French Es Spanish 30
31
Note: 1. The files stored in card will be lost due to format operation, please backup the data before formatting the memory card. 2. The “My image” menu can be activated while you had set “Start-up Image” function.
Application to PC 1. Connect to PC Please install the drive program first before connecting the camera to the computer. There are two USB modes which are MSDC and PCCAM, and default is MSDC mode. Turn on the camera power. If the PC camera function of the camera is to be used, set the camera is PCCAM mode at setup menu. If the removable disc function of the camera is to be used, please set the camera is MSDC mode at setup mode.
2. Driver Install You can use and operate the movable disc function and PC Camera provided by the digital camera through PC. Please install the software driver program according to the following steps before application. Note: Don't connect the camera and computer USB port before installing the driver to the computer to prevent driver installation mistake. ◎ Software installation interface 1. Please load the installation CD in the fitting into the computer photo driver; 2.
z (If your optical driver has no auto execution or close auto execution function, please directly click and run autorun.exe program located at the CD root directory.) z For Windows Vista, the following window will pop up when the system automatically executes the installer in the CD. Please click Run SoftwareInstaller.exe to continue.
Driver Installation Click “Driver” button, and complete the installation as per the wizard. Then, reboot the computer. Note: For Windows Vista, the following window will pop up when installing the software. Please click to continue.
Please restart the PC after installation. The driver program is suitable to the operating system of Windows 98 SE, Windows 2000, Windows ME, Windows XP and Windows Vista. If it appears the following window, please click “Yes” button to go on with the installation.
Hint: In Windows 98SE operation system, if it is required to play the video record, please install VideoImpression first. With the help of the DirectX9 module in the VideoImpression, the video shot by the camera will be successfully played on the computer.
3.
Click button and finish the installation step by step according to the indications. Note: For Windows Vista, the following windows will pop up when installing the software. Please click to continue.
Please restart your PC after installation. Running the PhotoImpression 5: Double-click the icon on the desktop, or run PhotoImpression 5 in “Start→Programs”. The following window will pop up when opening PhotoImpression5. Please left-click the center of the window to close it. PhotoImpression can be opened after the window is closed.
After opening the PhotoImpression, “Get Photo” window will appear.
Select the desired image from “Get Photo” window, and you will find the image is displayed at the central area of the window. After that, you can select the image to edit. Detailed operation method of PhotoImpression can be referred to "Help" of the program (as shown in the following figure).
Installation and Operation of VideoImpression 2: Installing VideoImpression 2: Click button and finish the installation step by step according to the indications. Note: For Windows Vista, the following windows will pop up when installing the software. Please click to continue.
45
Please restart your PC after installation. Running the VideoImpression 2: Double-click the icon on the desktop, or open VideoImpression 2 in “Start→Programs”.
Detailed operation method of VideoImpression 2 can be referred to “Help” of the program (as shown in the following figure).
48
Using PC Camera function: Connect the camera in PC Camera mode to your PC and open VideoImpression 2. Click “Wizard” (Fig. I) and click (Fig. II); or click window as Fig. IV shown will appear. ▲Fig. I ▲Fig. II 49 in button in “MEDIA” (Fig. III) tab.
▲Fig. III ►Fig.IV Click button to exit after use. Note: 1. In case of no image, please check whether the driver for the camera is installed securely, and check whether the selected device in the window is: For detailed information of VideoImpression 2, please refer to the part “Installation and Operation of VideoImpression 2”.
Technical Parameters Image sensor Function mode Lens Focal distance Digital zoom Shutter LCD display screen Picture resolution Video resolution White balance Exposure Self-shoot timer File format Memory medium Display screen 1.3 Mega Pixels (CMOS) Video record, shoot photo and voice memo, playback, mass storage and PC camera F/3.1 f=6.5mm 15cm~25cm (Macro) / 140cm~infinity (standard mode) 4x Electronic shutter 3.8 cm (1.
USB interface Power supply Dimensions (L×W×H) Weight High Speed USB 2.0 interface Battery: 3 x AAA Alkaline 1.5V 94.6 x 57.1 x 40.5 mm Not including batteries: Approx.
01.
