CONTENT Preface ............................................................................................ 1 Notice .............................................................................................. 1 Protection of Power Cable .............................................................. 2 Precautions and Maintenance ........................................................ 2 Instructions for Using the Built-in Battery........................................ 3 Precautions .....................
Preface Thank you for choosing our portable DVD player. Please read this instruction manual carefully before use and keep it properly for later reference. This is a new DVD player with perfect sound and display output. It is suitable to be used in office(s), indoor, hotel(s), car(s), and so on. Notice Non-professional staff should not touch the laser lens. Please wash hands before cleaning the laser lens or go to maintenance professionals, so as to avoid electrostatic breakdown or damage the laser lens.
Protection of Power Cable 1. 2. 3. 4. 5. 6. To disconnect the AC power cord, pull the plug out from the connector. Please do not place the AC power cord close to any heat source. Please do not place heavy objects on the AC power cord. Please do not disassemble and repair the AC power cord by yourself. This player is a class-I laser product and with a “Class-I” remark. This product contains a low-power laser device.
Instructions for Using the Built-in Battery Precautions A high-capacity rechargeable lithium battery is built into this player; it is strictly forbidden to take the battery apart on your own. Seek professional technical assistance to replace the battery. 1. Please do not throw the battery into fire or any heat area; please do not store the battery in any area with a high temperature. 2. Please do not remove the battery when it is in use or being charged. 3.
Appearance Instruction Function Keys on the Player 1. : Press this button to turn off the sound. 2. : Menu setup for displaying. 3. 4. : Press this button to set the functions of the DVD player. : Display the working status of DVD. 5. : Decrease the volume. 6. : Increase the volume. 7. 8. : TV channel increase / Previous section : TV channel decrease / Next section 9. : Fast reverse 10. : Fast forward 11. : NTSC/PAL 12. 13. 14. : Function mode switch (DVD/AV switch). : USB/SD switch.
15. : Press this button to Play / Pause. 16. : Stop 17. : DVD Door Open / Close Right Side of the Player 1. DC-IN: DC IN 12V 2. POWER: Power On / Off 3. AV IN: External AUDIO / VIDEO input 4. AV OUT: AUDIO / VIDEO output 5. Earphone Port 6. CARD: SD Card slot 7. USB: USB socket Rear Side of the Player 1. GAME: Game Control Pad socket Front side of the Panel 1. Battery Charging Indicator Red light: Charging Yellow light: Full 2. Power Indicator Blue light: On 3.
Remote Control Introduction Installation of Remote Control Battery 1. Flip to the back of the remote control and remove the lid. 2. According to the battery polarity position, correctly insert two sections of AAA batteries. 3. Put back and close the lid accordingly. Precautions 1. 2. 3. 4. 5. 6. 7. 8. Do not use rechargeable batteries. Do not mix different brands and types of batteries. Do not use new and old batteries together.
Remote Control Appearance 7 1 POWER 2 OSD 3 DVD/USB Card 4 MODE 5 Number Buttons 6 AUDIO 7 SUBTITLE 8 ABGLE 9 TITLE / PBC 10 RETURN 11 ZOOM 12 SETUP 13 MENU 14 ENTER 15 Direction Buttons 16 GOTO 17 Play/Pause 18 Stop 19 SLOW 20 REPEAT 21 MUTE 22 VOL+ 23 VOL- 24 Previous 25 Next 26 Fast Reverse 27 Fast Forward
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. POWER: Power switch of DVD player. OSD: Display the working status of DVD. DVD/USB Card: Press this button to switch among DVD/USB/CARD interfaces in the DVD mode. MODE: Press this button to switch between the different functions of DVD/AV modes. Number Buttons: Number buttons can be used to select songs. AUDIO: Press [Audio] to switch among multiple audio languages. This function works only when the disc supports multiple audio languages.
Press [GOTO] once when the disc is being played back; the TV screen shall display the disk type, the number of titles/sections (songs) in the disc, the title number/section (song) number of the currently playing item, and play time of the section (song). Input a designated title, section (song), and time, and then press [Enter] to activate the designated title, section (song) and play time directly. 17.
Basic Operation Power On Connect the power adapter with either 220V or 110V power supply, switch the [Power] to ON, and wait for 3 seconds to turn on the device. The device displays the latest shutdown status. System Setup Press “SETUP” key on the keypad of the device or remote control; you can do the below setups: General Setup Page: 1. TV Display: You can choose the TV display in 4:3 Pan Scan, Letter Box or 16:9 widescreen. 2. Angle Mark: On / Off 3.
Preference Page: TV Type: You can setup the TV system: PAL / AUTO / NTSC. Audio Language: There are eight options under this item for selection: English / Chinese / German / Spanish / French / Portuguese / Italian / Russian. Subtitle: There are eight options under this item for selection: English / Chinese / German / Spanish / French / Portuguese / Italian / Russian.
CD Copy Function Convert CD Tracks to MP3 Files Plug in an USB stick or memory card. Insert the CD into the player. Press [SUBTITLE] on the remote control. The "CD RIP" menu appears. In this menu you can select: 1) Speed 2) Bit Rate 3) Create ID3 (Yes/No) 4) Device (SD/USB) Use the arrows on the remote control to select the desired tracks. Use the button "Select All" to highlight all tracks on the CD. Press START button on the screen to start the conversion.
Play MP3/JPEG Disc When playing a disc with both MP3 files and JPEG files, you can press [Right] to move the cursor to the mark of browsing pictures and press [Enter] to enter picture-browsing mode while playing MP3 files. Press [Right] again to enter the JPEG play menu and then press [Right] for the third time to select the picture-play mark on the lower right corner. Here, you can select either MP3-play or JPEG-play directly.
Troubleshooting Problem Possible solution No power/not charging 1. Check if the power plug is correctly connected to the power socket. 2. Check if the power switch is on. Disk cannot be read 1. Check if the power switch is on. 2. Check if the disc is being inserted properly; the disc side with label should be face up. 3. Check if the disc is being placed upside down. 4. Please change or clean the disc if it is damaged or dirty. 5.
Specifications DVD Technical Parameters Supported formats DVD/SVCD/VCD/CD/CD-R/RW/JPEG/DVD+R/-R/MP3/MP4/DIVX Other supported media USB/SD/MMC Card Shockproof function DVD: 3: seconds AUDIO output level AUDIO: 2.0V±0.2 Speaker: 8ohm/1.5W Earphone output is less than 15mw Frequency response 20HZ~20KHZ Audio signal ratio (S/N) ≥50dB Dynamic range ≥50dB Video output level 1.0V±0.
