Contents Precautions ............................................................................... 1 Product Introduction .................................................................. 3 Introduction to Appearance and Keypad ................................... 4 Get Started ................................................................................ 5 Charge the Built-in Lithium Battery ........................................ 5 Use of Memory Card ..................................................
This user's manual has referred to the latest information we had when this user’s manual was made. The screen display and illustrations are used in this user's manual for the purpose of introducing details of this video camera in a more specific and direct way.
the surface of video camera or its lens. If it is required to clean video camera surface, firstly blow away the sand dust accumulated on this surface, and then wipe the video camera gently with rag or tissue applicable to optical equipment. Please use the cleaning agent of video camera for wiping if necessary. Do not use organic solvent to clean the video camera. Do not touch the lens surface with fingers.
Product Introduction This product is small in size and easy for installation. With high-performance chips, this product can produce high-definition videos with excellent continuity of dynamic images, even under low illumination conditions, and supports H.264 HD video format. The video mode supports four options: FHD (1920x1080 30fps), HD (1280x720, 60fps), HD (1280x720, 30fps) and VGA (640x480, 120fps). This product supports video output and live playback functions.
Introduction to Appearance and Keypad Infrared light Camera lens Busy light / Charging light Screen-off light Touch screen TFT LCD Screen-off light switch Tripod socket Microphone Shutter Key microSD card slot Power key HDMI interface USB interface Reset key 4
Get Started Charge the Built-in Lithium Battery USB To charge the camera, connect it to the computer via the USB cable. Then, the charge indicator light (red) will be on. After the camera is fully charged, the charge indicator light will be off. In general, it can be fully charged after 2-4 hours.
Use of Memory Card 1. Push the microSD card into the card slot according to the direction instruction beside the slot of memory card till it is completely inserted. 2. To take out the microSD card, gently press the memory card inward and it will pop up. microSD card NOTE: No built-in memory is available in this video camera. Make sure to insert memory card before using. It is advised to use microSD card with speed faster than Class 4.
Startup/Shutdown 1. Startup: Press and hold the POWER button for 2 seconds. The screen of the display is activated and the camera is turned on. 2. Shut down: Press the POWER button again will shut down the camera. 3. Auto Screen-off: When the idle time of the camera reaches the automatic screen-off time, it will turn off the screen to save power. After the screen is turned off, screen-off light will be on. 4.
Conversion between Modes The camera has four modes: Video recording mode, Photo mode, Vehicle mode and Playback mode. These modes can be switched over by clicking the icon on the upper left corner of the LCD display after startup. Video recording mode Vehicle mode Photo mode Playback mode Indicator Light Busy indicator light (Blue): When the camera is working (e.g. recording videos, shooting pictures, automatic screen-off, etc.), the busy indicator light will blink.
Video Recording Mode After turning on the camera, it will directly go to the video recording mode. You can start recording videos by pressing the shutter button. To stop video recording, just press the shutter button again. When the memory card is full or the battery power drops to a low level, the camera will also automatically stop the video recording. 1. 2. Mode: Indicating the camera is in video recording mode. Video size: Available in FHD (30fps) / HD (60fps/30fps) / VGA (120fps). 3.
Photo Mode After turning on the video camera, it will directly get to the video recording mode. To switch to the photo mode, click the mode icon on the upper left corner of the LCD display. You can shoot a photo by pressing the shutter button. 12 1. 2. 3. 4. 5. 6. Mode: Indicating that camera is currently in photo mode. Photo size Estimated available number of photos. Indicating the face detection function is activated. Icon for setting the time and date.
Vehicle Mode The length of each recording file is 3 minutes. 1 4 5 6 1. 2. 3. 4. 5. 6. 7. 2 3 7 Mode: Indicating that the camera is in the vehicle mode. Video size: Available in FHD (30fps) / HD (60fps/30fps) / VGA (120fps). Recording time: indicating the available length of remaining time to be recorded. Icon of setting time and date. Click this icon can flip the image by 180 degrees. Battery status: Indicating the current power level of the battery.
Playback Mode After turning on the camera, press the Playback icon ( ) in the lower right corner of the LCD display. Then click on the mode icon ( ) to activate the corresponding menu. Normal video files Vehicle video files Photo files 1. Playback video clips (normal video and vehicle video): Click / to switch to the file list mode. Then you can playback video clips by clicking a file in the list.
2. Click Click Click to pause the playing. to fast forward the playing. to fast rewind the playing. Click to stop the playing. Playback photos: Click the icon then you can view photos by clicking the icon “◄” or “►”. 3. File deletion After clicking the Delete File icon , the screen will appear as shown in the right figure. Click YES to delete the current file immediately, or click NO to cancel the deletion operation.
Connecting the Camera to High-Definition TV Connect the camera to a High-Definition TV with HDMI cable (not included). Then video signals from the camera will be automatically output to the High-Definition TV. HDMI Cable Connection diagram HDMI Cable Signal transmission Application on the Personal Computer Connect the camera with a computer via the USB cable. The “removable disk” will appear on the window of “my computer”. The stored photos or videos can be found in the “removable disk”.
Application of Remote Control Signal transmission port OFF key REC key SNAP key While using the remote control, place its signal transmitter port toward the infrared signal receiver light of the camera. Then you can record videos, take photos or shut down the camera by pressing the corresponding buttons.
Waterproof Case Using Notice Before sealing the waterproof case, keep the camera housing’s rubber seal clean, a single hair or dust or sand can cause the leakage. You can test by closing the case without inserting the camera. Submerse the case completely in water for about a minute. Remove the case from the water, dry off its exterior with a towel then open the case. If the entire interior is dry, the case is safe for use under water.
Technical Parameters Image Sensor CMOS Function Mode Video recording mode, photo mode, vehicle mode, playback mode Camera Lens F3.1 f=2.9mm Digital Zoom 4X Shutter Electronic shutter LCD Display Screen 6.1 cm (2.4”) touch screen Image Resolution 12M (4000x3000) / 10M (3648x2736) / 8M (3264x2448) / 5M (2560×1920) Video Resolution FHD: HD: HD: VGA: White Balance Automatic Exposure Automatic File Formats 1920x1080 @ 30fps 1280x720 @ 60fps 1280x720 @ 30fps 640x480 @ 120fps Video AVI (H.
Service Procedure If you have reason for complaint, or your device is defective, please contact your dealer or the service division of JAY-tech GmbH to make arrangements for service procedures. Service Hours: Phone No.: Email: Monday - Thursday from 8:00 am to 5:00 pm Friday from 8:00 am to 2:00 pm. 02161 / 575 8950 info@jay-tech.de Please do not send your product to our address unless requested to do so by our service team. All costs and the risk of loss are the responsibility of the sender.