User Manual

1 2 3

TROUBLESHOOTING

Soft reset: If your earbuds are not responding, put your Tarah in the charger cradle and connect the USB charging cradle

to a power source. This will turn your earbuds off and perform a soft reset.

Factory reset: If this does not resolve your problem we recommend resetting your earbuds to their original factory

settings. Before starting this process please “FORGET” or “REMOVE” your Tarah device in your Bluetooth list of discovered

devices in your audio device.

Put your earbuds

in to pairing mode.

Press and hold the

Middle Button until

the earbuds turn off.

Then press and hold

the Middle Button

for 5 seconds until

the white LED starts

blinking.

While the white LED

is blinking press the

Middle Button twice.

The red LED

illuminates briefly, and

then the white LED

starts blinking again.

Now your earbuds are

reset and ready to pair.

Go to your audio device’s

Bluetooth menu and select

Tarah to re-pair.