User Manual

28
PAIRING (SETTING UP) HEADPHONES WITH
YOUR PHONE / MUSIC DEVICE
1. With headphones turned off, & within 1 meter (3 feet) of music device, press & hold center
key for more than 4 seconds until you see alternating red/green flashing of the status
indicator and a voice prompt saying “Searching for your music device”.
2. On your phone/music device, turn Bluetooth on & have it search for Bluetooth devices (see
instructions in the phone/music device manual for details).
3. Check for “X2” and select (enter passcode 0000 if prompted).
4. X2 voice prompt will say “headphones connected”.
5. If the pairing is not successful, switch off headphones by pushing the center key for more
than 4 seconds and repeat the steps outlined above.