ITEM NO. BEJY0538 oa NOTE: This brochure contains IMPORTANT safety info. Please read and keep for future reference.
@ Keep furniture away from heat. @ Do not clean furniture with harsh cleansers or polish. Do not use detergents, Solvents, abrasives, spray packs or leather cleaner. Use non-color mild soap with warm water clean spills(Mix 1:10 soap to water) & Do not place furniture under direct sunlight, material will possibly fade over time. # Do not use on site dry Cleaning machine. # Children should not climb or jump on the furniture. # Do not write on furniture without a padded barrier to protect the surface.
LIST 28*30mm Wood Dowel Flat Washer Spring Washer Long Bolt Handle 14 PCS 14 PCS 14 PCS 8 PCS 1PC 28*30mm @3*15mm*D6mm Leg Lock Round Head Bolt Flat Head Screw Short Bolt Round 4 PCS 1PC PCS 6 PCS Head, Sew #11 #12 23*15mm*D6mm > Round Allen Wrench Head Screw 8 PCS 1PC @8*30mm 23*15mm*D6mm Medium Wood Dowel Flat Washer Spring Washer Round Head Screw 1PC 1PC 1PC 1PC Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment.
INSTRUCT( STEP 1: 1.Use long bolt #4 . spring washer #3 and flat washer #2 to attach bottom frame B to leg P&O, then tighten it with Allen wrench #12.
STEP 2: 1.Insert wooden dowel #1 into the corresponding hole of fixed shelf G. 2.
Locked MN Unlocked STEP 3 1.Insert wooden dowel #1 into the corresponding hole position of reassemble step 1. make sure all holes aligned and pull the combiner by turning 2.Insert the reassemble step 2 into it as counterclockwise with hand to lock it.
Locked MN STEP 4 Unlocked 1.Insert wooden dowel #1 into the corresponding hole position of reassemble step 3 as picture show . 2 Insert top panel A into it as picture show, make sure all holes aligned and pull the combiner by turning counterclockwise with hand to lock it.
STEP 5: Install back panel F 1.Put back panel F into the backboard groove of reassemble step 4. 2.Use Allen wrench #12 and round head screw #10 to attach back panel F to the reassemble step 4, make sure all holes aligned and tighten all screws to secure.
STEP 6: Install baffle panel E 1.Insert wooden dowel #1 into the corresponding hole position of bottom frame B. 2.Insert baffle panel E into the corresponding hole position of bottom frame B. 3.Use short bolt #9 . spring washer #3 and flat washer #2 to attach bottom frame B to baffle panel E, tighten it with Allen wrench #12.
STEP 7: Insert seat cover H 1.Use short bolt #9. spring washer #3 and flat washer #2 to attach bottom frame B to seat cover H, make sure all holes aligned and tighten it with Allen wrench #12.
STEP 8: Insert trestle N 1.Put trestle N into leg O&P as picture show. 2.Use leg lock #6 and round head screw #11 to attach trestle N to leg O&P, make sure all holes aligned and tighten all screws to secure.
STEP 9: 1.Use Allen wrench #12 and flat head screw #8 to attach drawer left panel K &right panel J to drawer back panel L, make sure all holes aligned and tighten all screws to secure. 2.Carefully align and slide drawer bottom panel M into the groove along rear edge of per-assembled unit L&J&K then use Allen wrench #12 and flat head screw #8 to connect drawer front panel | with the reassemble unit L&J&K, make sure all holes aligned and tighten all screws to secure. 3.
STEP 10: 1.First of all , Slide the female sliding rail of panel C&D to the most front and keep it, then insert the drawer male sliding rail into the female sliding rail as picture show. 2.Pull out the drawer completely, while pressing the plastic snap locks in the left and right side slides of the drawer, keep the snap locks depressed and pull the drawer to remove the drawer.
WARRANTY We strive to offer high-quality products, and we also try our best to satisfy each and every customer that orders from us with product or service as needed. We provide 30 days warranty starting from the time you receive the item. Each customer must provide a record of their order such as the order number, or item receipt for any items that are out of the warranty period you may also still receive replacement parts by purchasing them with our company if they are available.
