Caution:You must read this before you proceed Push Back Chair Label Picture A B C Noble House Home Furnishings LLC Description QTY Chair Backrest 1 Chair Base Front Leg (with Acrylic Gasket) 1 2 Page 1 OF 9
D Hind Leg (with SiliconeGasket and Acrylic Gasket) 2 E Left Wing 1 F Right Wing 1 Description QTY Gasket 3 Label Picture ① Befor Beginin g Assembl y: Noble House Home Furnishings LLC Page 2 OF 9
Overview Chair Backrest(A) Left Wing(E) Right Wing(F) Chair Base(B) Front Leg(C) Hind Leg(D) Front Leg(C) FRONT FACING This Push Back Chair has multipled parts and may require up to some 30 minutes to assemble. To give you an overview of the Push Back Chairparts,the above picture is to help you put the various parts into perspective.Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Take out the Chair Backrest(B) from Chair Base(A). Place the Chair Base(A) facedown on a clean, non-marring surface. Step 2 C D ① Remove the small carton and take out the Front Legs(C), Hind Legs(D) and Gaskets(①). Step 3 Pull the front footboard away from the front of the Chair Base (B).
Step 4 D C ① ① B Place the Chair Base(B) facedown on a clean, non-marring surface. Install the Front Legs(C) and Hind Legs(D) into the bottom of the Chair Base(B) by placing a Gasket(①) onto the threaded stem of the Legs. And then insert the threaded stem into the threaded mounting position at each Corner of the Bottom of the Chair Base(B). Tighten by turning the Legs clockwise. Stand the assmbled Chair Base up and test for stability on a Level Surface.
With assistance of your adult partner,hold up the fully assembled Chair Base(B). Insert the small metal arms on the sides of the Chair Backrest(A) into the prefabricated slide lock gadget on the ChairBase(B) as shown above. Firmly but gently, push the Chair Backrest(A) downwards until the Chair Backrest(A) is fully slotted and locked into position.
Step 7 A Velcro Back side Stand behind Chair. Smootly down the fabric flap on the Chair Backrest(A). Run your hands down both sides of the flap,from top to bottom,alowing the velcro tape to adhere to the flap under the seat of the chair. Step 8 Make sure all parts are connected and securely locked into position. Your Chair is ready to use. This Chair can only be used on a flat, level surface.
User Instructions. Push Back Chair Please read the Instruction Manual below carefully before use. Supervise children,when in use of this Push Back Chair. Warning Do not allow children to play on the chair. Always leave the chair in an upright and closed position after use! Keep hands and feet clear of the footrest mechanism and ANY gaps. Only the occupant should operate the chair.
Noble House Home Furnishings LLC Page 9 OF 9