HULALA H O M E ITEM NO.NSHM0847 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW 2PERSONEN 03/20
PARTS LIST x1 A B x1 C x1 D x1 E x1 F x1 G x1 H x1 I x1 J x2 K x2 L x2 M x2 N x2 O x4 04/20
HARDWARE LIST #1 x12 ∅3*14mm x16 #7 x16 #2 ∅1/4" #8 #3 x16 ∅1/4" #4 x16 ∅1/4"*1/2" #5 x4 ∅8#*1" #6 x2 ∅3*12mm x1 ∅8#*1" TOOL LIST x1 #9 #10 x1 M4 HARDWARE SPARE LIST #1 x1 #7 x1 05/20
ASSEMBLY INSTRUCTIONS STEP-1 1.Insert part (G) into part (F),make sure all holes align . 2.Insert panel (F＆G) into panel (C),make sure all holes aligned and then tighten it with allen key #9 as picture show.
ASSEMBLY INSTRUCTIONS STEP-2 1.Insert panel (E) into panel (C),make sure all holes aligned and then tighten it with allen key #9 as picture show.
ASSEMBLY INSTRUCTIONS STEP-3 1.Insert panel (A) into panel (C),make sure all holes aligned and then tighten it with allen key #9 as picture show.
ASSEMBLY INSTRUCTIONS STEP-4 1.Insert panel (B) into panel (C),make sure all holes aligned and then tighten it with allen key #9 as picture show.
ASSEMBLY INSTRUCTIONS STEP-5 1.Insert side panel (D) into the corresponding hole of preassembled step 4 ，make sure all holes aligned and use allen key #9 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS STEP-6 1.insert back panel(I) into the groove of preassembled step 5,make sure all holes aligned and use screw#1 to attach them ，tighten screw #1 with screwdriver#10.
ASSEMBLY INSTRUCTIONS STEP-7 1.Insert gasket #3 and #2 in sequence into bolt #4, install leg O on of bottom panel B, ensure the corresponding holes are aligned and fix with screw #4, then tighten the screw with an Allen key #9.
ASSEMBLY INSTRUCTIONS STEP-8 1.insert part (H) into the preassembled step 7,make sure all holes aligned and use screw#5 to attach them ，tighten screw #5 with screwdriver#10.
ASSEMBLY INSTRUCTIONS STEP-9 1.insert part #8 into the preassembled step 8,make sure all holes aligned and use screw#6 to attach them ，tighten screw #6 with screwdriver#10.
ASSEMBLY INSTRUCTIONS STEP-10 Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-11 1.Connect part (K&L) to part J using screw #7 and tighten it with screwdriver #10.Slide in the part (M) into the groove in part (L&K). make sure they are also in groove in part (J).
ASSEMBLY INSTRUCTIONS STEP-12 1.Connect part (K&L) to part N using screw #7 and tighten it with screwdriver #10.
ASSEMBLY INSTRUCTIONS STEP-13 Attention：When installing the drawer,slide the steel ball slide rail of side panel to the most front as picture show.
ASSEMBLY INSTRUCTIONS STEP-14 Assembly completed.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
