HULALA H O M E ITEM NO.NSHM0993 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW 2PERSONEN 03/23
PARTS LIST x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 04/23
PARTS LIST x1 x1 x1 x1 x1 05/23
HARDWARE LIST x23 x14 Ø3.5*25mm Ø3.5*14mm x1 x1 Ø4*35mm x1 x2 #5 x1 #6 x2 Ø3.5*12mm x1 Ø3.5*14mm TOOL LIST x1 x1 HARDWARE SPARE LIST x2 Ø3.
ASSEMBLY INSTRUCTIONS STEP-1 1.Insert the E board into the F board.make sure all holes aligned and use screw#1 to attach them ，tighten screw #1 with screwdriver#11. F #1 #11 E F #1 x3 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-2 1.Insert panel (A&E&F&I&B) into side panel (D),make sure all holes aligned and then tighten it with allen key #10 as picture show.
ASSEMBLY INSTRUCTIONS STEP-3 1.Insert preassembled step 2 into the corresponding hole of side panel (C)，make sure all holes aligned and use allen key #10 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS STEP-4 1.insert back panel(G) into the groove of preassembled step 3,make sure all holes aligned and use screw#2 to attach them ，tighten screw #2 with screwdriver#11. #11 #2x14 #2 x14 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-5 1.insert part (H) into the preassembled step 4,make sure all holes aligned and use screw#1 to attach them ，tighten screw #1 with screwdriver #11. #11 #1 #1 #1 #1 x4 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-6 1.insert part #3 into the preassembled step 5 ,make sure all holes aligned and use screw #4 to attach them ，tighten screw #4 with screwdriver#11. #11 #4 #3 #4 x1 #4 x2 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-7 1.Connect part (L&M) to part N using screw #4 and tighten it with screwdriver #11.Slide in the part (U) into the groove in part (L&M). make sure they are also in groove in part (N). #1 N 1: #1 M N #1x4 M&L L #11 2: U M #1 L x4 #11 x1 N Ø3.
ASSEMBLY INSTRUCTIONS STEP-8 1.Connect the (J) connection (L&M) using screw #1 , and tighten it with screwdriver #11. #11 #1 #1 x4 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-9 1.Insert the O plate into the groove of the N&J plate.
ASSEMBLY INSTRUCTIONS STEP-10 1.Connect part (P&Q) to part R using screw #1 and tighten it with screwdriver #11.Slide in the part (S) into the groove in part (P&Q). make sure they are also in groove in part (R). 1: Q R #1x4 P P&Q R #11 S Q P #1 x4 #11 x1 R Ø3.
ASSEMBLY INSTRUCTIONS STEP-11 1.Connect the (K) connection (P&Q) using screw #1 , and tighten it with screwdriver #11. #11 #1 #1 #1 #1 x4 #11 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-12 18/23
ASSEMBLY INSTRUCTIONS STEP-13 1.Place the part T into the inner space of the upper drawer.
ASSEMBLY INSTRUCTIONS #9 x1 #6 x1 x1 #11 Ø3.5*14mm STEP-14 1.Use screw #9 to attach part #6 to pre-assemble unit at step 13 ,tighten screws with screwdriver #11 #9 .
ASSEMBLY INSTRUCTIONS #5 #6 x1 #7 x1 x1 #11 x1 Ø4*35mm STEP-15 1.Install the anti-collapse device. 2.Mark the position on the wall, that corresponds to the location of part #6 on the of panel (A); Drill and insert the expandable screw #5 by hammer. 3.Assemble the part #6 to the wall. Align the hole in the part #6 with the expandable screw #5, use screw #7 to attach it and tighten by screwdriver#11. NOT PROVIDED L L A W 1. #6 L L A W #7 2. ALL W 3.
ASSEMBLY INSTRUCTIONS #8 x1 STEP-16 1.Let the plastic belt #8 pass through the both part #6 and pull tightly.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
