HULALA H O M E ITEM NO.NSSD0731 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soap with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A D E F G C B J I H J H I 2PERSONEN 03/29
PARTS LIST x1 x1 x1 x1 x1 x1 x1 x2 x2 x2 x2 x2 x1 x1 x1 x1 04/29
PARTS LIST x1 x1 05/29
HARDWARE LIST x14 Ø3.5*14mm x8 Ø6*12mm x6 x17 Ø6*35mm x4 Ø6*30mm x2 x16 Ø8*30mm x4 x17 Ø15*11 x2 x13 Ø4*35mm x1 Ø7*50mm x2 Ø8*30MM Ø6*40mm x17 x4 x1 x1 TOOL LIST x1 x1 M4 HARDWARE SPARE LIST x1 Ø3.
HARDWARE SPARE LIST x1 Ø6*40mm 07/29
ASSEMBLY INSTRUCTIONS STEP-1 1.Connect part (N&M) to part (L) using screw #5 and tighten it with screwdriver #19.Slide in the part (O) into the groove in part (N&M) . make sure they are also in groove in part (L).
ASSEMBLY INSTRUCTIONS STEP-2 Align the holes in part K, tighten with screwdriver #19 tighten #2. Connect the part K with part N&M align the hole in the part M&N. ,insert the bolt #2 in part K into part M&N . insert cam bolt #4 into the corresponding hole of side panel M&N,and tighten the nuts #4 with a screwdriver #19. After installation, cover the screw holes with #15. Make sure the groove is in same side as picture show.
ASSEMBLY INSTRUCTIONS STEP-3 1.Connect part (P&Q) to part (L) using screw #5 and tighten it with screwdriver #19.Slide in the part (R) into the groove in part (P&Q) . make sure they are also in groove in part (L).
ASSEMBLY INSTRUCTIONS STEP-4 Align the holes in part K, tighten with screwdriver #19 tighten #2. Connect the part K with part P&Q align the hole in the part Q&P. ,insert the bolt #2 in part K into part P&Q . insert cam bolt #4 into the corresponding hole of side panel Q&P,and tighten the nuts #4 with a screwdriver #19. After installation, cover the screw holes with #15. Make sure the groove is in same side as picture show.
ASSEMBLY INSTRUCTIONS STEP-5 1.Use screw #1 to attach the handle #14 to panel K, tighten screws with screwdriver #19. Q #19 K R L K P N O K L M x4 x2 #19 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-6 1.Connect part F to part E using screw #5 and tighten it with screwdriver #19 . Align the holes in part E&F, insert wooden dowel #3 by hand.
ASSEMBLY INSTRUCTIONS STEP-7 Align the holes in part (C&D), tighten with screwdriver #19 tighten #2.
ASSEMBLY INSTRUCTIONS STEP-8 Connect the part C&D with part E&F. align the hole in the part E&F. insert the bolt #2 in part C&D into part E&F . insert cam bolt #4 into the corresponding hole of part E&F,and tighten the nuts #4 with a screwdriver #19. After installation, cover the screw holes with #15. Make sure the groove is in same side as picture show.
ASSEMBLY INSTRUCTIONS STEP-9 1.slide in the part G into the groove in part C&D ,make sure they are also in groove in part F.Align the holes in part C&D, insert wooden dowel #3 by hand.
ASSEMBLY INSTRUCTIONS STEP-10 Connect the part B the pre-assembled unit in step 9. Then align the holes in part B,Insert screw #6 and push it down so that it connects to parts C&D. Next,and tighten the screw #4 with an Allen key #18.
ASSEMBLY INSTRUCTIONS STEP-11 1.Use screw #8 to attach the part J to panel B, tighten screws with Allen key #18.
ASSEMBLY INSTRUCTIONS STEP-12 Prepare the leg racks. Align the holes of the H part with the holes of the I part, install the screw #7, and tighten the screw #7 with the allen key #18.
ASSEMBLY INSTRUCTIONS STEP-13 connect the leg frame to the cabinet.Attach the leg frame to the pre-assembled unit in step 11 with a screw #9 and tighten with a allen key #18.
ASSEMBLY INSTRUCTIONS STEP-14 1.insert part #16 into the preassembled step 13,make sure all holes aligned and use screw #1 to attach them ，tighten screw #1 with screwdriver#19.Align the holes in part C&D&E, insert wooden dowel #3 by han d. #16 D #1 #1 F E G F C G #19 F #1 #1 G x1 x6 Ø8*30mm #1 x2 #19 x1 Ø3.
ASSEMBLY INSTRUCTIONS STEP-15 Align the holes in part A, tighten with screwdriver #19 tighten #2.
ASSEMBLY INSTRUCTIONS STEP-16 Connect the part C&D&E with part A. align the hole in the part C&E&D. insert the bolt #2 in part A into part C&D&E . insert cam bolt #4 into the corresponding hole of part E&D&C,and tighten the nuts #4 with a screwdriver #19. After installation, cover the screw holes with #15. Make sure the groove is in same side as picture show.
ASSEMBLY INSTRUCTIONS STEP-17 Attention：When installing the drawer,slide the steel ball slide rail of side panel to the most front as picture show.
ASSEMBLY INSTRUCTIONS STEP-18 Insert hardware #6 into part G as shown, screw in screw #1 using screwdriver #19 and tighten fully. Install the plastic cover on the back panel G. #17 A 1. G #1 #17 C #1 2. #1 G #1 3. G #1 #1 G #19 x1 x6 #1 x6 x1 Ø3.
ASSEMBLY INSTRUCTIONS #1 x2 #10 x1 #19 x1 Ø3.5*14mm STEP-19 1.Use screw #1 to attach part #10 to preassemble unit at step .
ASSEMBLY INSTRUCTIONS #12 #10 x2 x1 #5 x2 x1 #19 Ø4*35mm STEP-20 1.Install the anti-collapse device. 2.Mark the position on the wall, that corresponds to the location of part#10 on the of panel (A); Drill and insert the expandable screw #12 by hammer. 3.Assemble the part #10 to the wall. Align the hole in the part #10 with the expandable screw #12, use screw #5 to attach it and tighten by screwdriver#19. NOT PROVIDED L L A W L L 1. A W 2. ALL W #12x2 3.
ASSEMBLY INSTRUCTIONS #11 x1 STEP-21 1.Let the plastic belt #11 pass through the both part #10 and pull tightly. 2. #10 L L A W #11 1.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
