Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP-16

23/29

Connect the part C&D&E with part A. align the hole in the part

C&E&D. insert the bolt #2 in part A into part C&D&E . insert cam bolt

#4 into the corresponding hole of part E&D&C,and tighten the nuts

#4 with a screwdriver #19. After installation, cover the screw holes

with #15. Make sure the groove is in same side as picture show.

#19

D&E

#15

Ø15*11

Ø20

#4x5

#15x5

#15