HULALA H O M E ITEM NO.NSYL0821 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW K J I L M A H Q D F E N E C O P R P O S Q B N G R S G G G 2PERSONENS 03/22
PARTS LIST 1 A x1 B x1 C x1 D x1 E x2 F x1 G x4 H x1 I x1 J x1 K x1 L x1 M x1 N x2 O x2 P x2 04/22
PARTS LIST 2 Q x2 R x2 S x2 05/22
HARDWARE LIST #1 x15 #2 x12 ∅3*16mm ∅6*25mm #7 #8 x2 x1 #3 x1 #4 x24 ∅3*25mm #9 x1 #10 x2 ∅3*16mm #13 x2 ∅3*12mm #5 x1 #6 x1 #12 x1 ∅3*12mm #11 x1 8*4*1-1/2 #14 x4 ∅4*22mm TOOL LIST #16 x1 #17 x1 M6 HARDWARE SPARE LIST #1 x1 ∅3*16mm #2 x1 ∅6*25mm #4 x1 ∅3*25mm 06/22
ASSEMBLY INSTRUCTIONS STEP-1 1. connect (C&D) to (A&E) to ensure the holes are aligned,and lock the hardware.as the picture shows.
ASSEMBLY INSTRUCTIONS STEP-2 1.connect (B) to (C&D) to ensure the holes are aligned,and lock the hardware.as the picture shows.
ASSEMBLY INSTRUCTIONS STEP-3 1.Insert the part #3 into the corresponding hole (F) by hand. 2.Attach back panel (F) to pre assembled unit at step 2 with screw #1,and tighten it with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-4 1.Attach the leg (G) to the pre-assembled unit in step 3 with #2 bolt and tighten with a #16 allen key.
ASSEMBLY INSTRUCTIONS STEP-5 G Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-6 1.Connect socket #11 to part J using screw #13. and tighten it with screwdriver #15.Connect part (H&I) to part J using screw #4 and tighten it with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-7 1.Slide in the part (L) into the groove in part (H&I). make sure they are also in groove in part (J).Connect the (M) connection (H&I) using screw #4 , and tighten it with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-8 1.Attach the part (K) to the pre-assembled unit in step 7 with #10 screw , and tighten it with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-9 As shown in the picture, first insert the plug into the hole on the back panel and then install the drawer!!!! D A C 2 1 Attention：When installing the drawer,slide the steel ball slide rail of side panel to the most front as picture show.
ASSEMBLY INSTRUCTIONS STEP-10 Attention：Fasten the part to the red mark on the wire with screws F #8 #5 #1 F #17 #1 x1 ∅3*16mm #5 x1 #8 x1 #17 x1 ∅3*12mm 16/22
ASSEMBLY INSTRUCTIONS STEP-11 1.Connect part (N&O) to part (P) using screw #4 and tighten it with screwdriver #17.Slide in the part (Q) into the groove in part (N&O) . make sure they are also in groove in part (P).
ASSEMBLY INSTRUCTIONS STEP-12 1.Connect the (R) connection (N&O) using screw #4 , and tighten it with screwdriver #17. 2.1.Use screw #14 to attach the part S to panel R, tighten screws with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-13 D C 2 1 Attention：When installing the drawer,slide the steel ball slide rail of side panel to the most front as picture show.
ASSEMBLY INSTRUCTIONS STEP-14 1.Attach plastic strap #6 to back panel (F) using screw #1 and flat washer #7 , tighten screw with screwdriver #17.
ASSEMBLY INSTRUCTIONS #7 x1 #12 x1 #9 x1 #17 x1 WA LL 1. 8*4*1-1/2 NOT PROVIDED STEP-15 1.Install the anti-collapse device. 2.Mark the position on the wall, that corresponds to the location of plastic belt #6 on the back of panel (F); Drill and insert the expandable screw #9 by hammer. 3.Assemble the plastic belt #6 to the wall. Align the hole in the plastic belt #6 with the expandable screw #9, use bolt #12 and plat washer #7 to attach them and tighten by screwdriver #17. LL WA #9 2.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
