HULALA H O M E ITEM NO.SBHM0785 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A D F G E K F J I C H B N L L N M L L 2PERSONEN OVERVIEW 03/27
PARTS LIST A x1 B x1 C x1 D x1 E x1 F x2 G x1 H x1 I x1 J x1 K x1 L x4 M x1 N x2 04/27
HARDWARE LIST #1 x52 #2 x26 ∅3.
HARDWARE LIST #3 x16 ∅3.
ASSEMBLY INSTRUCTIONS STEP-1 Use screw#15 to attach clump weight(N) to the reverse side of bottom panel(B)，the position is behind the bottom panel(B) as picture show,tighten screw#15 with screwdriver#17. #17 #15x12 N Attention: The word "back"in the picture refers to the direction of bottom panel(B) with backpanel slot.
ASSEMBLY INSTRUCTIONS STEP-2 Use bolt #4，spring washer #6 and plat washer #5 to attach leg (L) to part (B),make sure all holes aligned ，tighten bolt #4 with allen key #16.
ASSEMBLY INSTRUCTIONS STEP-3 Screw leg (M) into the corresponding hole of part (B) with hand as picture show.
ASSEMBLY INSTRUCTIONS STEP-4 Insert panel (D)&(E) into the corresponding hole of part (B) ,make sure all holes aligned and tighten it with allen key #16.
ASSEMBLY INSTRUCTIONS STEP-5 Insert panel (C) into the corresponding hole of part (B) ,make sure all holes aligned and tighten it with allen key #16.
ASSEMBLY INSTRUCTIONS STEP-6 Use screw #3 to attach part #9 to top panel (A),make sure all holes aligned and tighten screw #3 with screwdriver #17. #17 #3x16 #9x4 #3 #3 #9 #9 A #9 x4 #3 x16 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-7 Insert top panel (A) into the preassemble step 5,make sure all holes aligned and tighten it with allen key #16.
ASSEMBLY INSTRUCTIONS STEP-8 Open the back panel (G), insert back panel (G) into the groove of preassemble step 7, make sure all holes aligned，use screw #2 to attach it and tighten screw #2 with screwdriver #17.
ASSEMBLY INSTRUCTIONS STEP-9 Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-10 Insert shelf holder #10 into the corresponding hole of panel (C)&(D)&(E) and then attach panel (F) to it.
ASSEMBLY INSTRUCTIONS STEP-11 Use screw #1 to attach hinge #7 to door (H)&(K),make sure all holes aligned and tighten screw #1 with screwdriver #17. When installing hinge，please pay attention to distinguish the category of hinge!!!! #17 #1x8 #7x4 #1 #7 #1 #7 #1 K #7 #1 #7 H #7 x4 #1 x8 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-12 Move door (K)&(H) to corresponding position of side panel (C)&(D),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. A A #1x16 C&D #17 C&D #7 H&K H&K A D C K H #1 x16 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-13 Use screw #1 to attach hinge #8 to door (I)&(J),make sure all holes aligned and tighten screw #1 with screwdriver #17. #17 When installing hinge，please pay attention to distinguish the category of hinge!!!! #1x8 #8x4 #1 #8 #1 #1 #8 #8 J #1 #8 I #8 x4 #1 x8 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-14 Move door (I) to corresponding position of middle vertical panel (E),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. #1x8 A A E I #17 E I #8 A E I #1 x8 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS STEP-15 Move door (J) to corresponding position of middle vertical panel (E),make sure all holes aligned and use screw #1 to attach them，tighten screw #1 with screwdriver #17. A #1x8 A #8 J E #17 E J A E J #1 x8 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS H& Do I&J or &k STEP-16 or &k &J &I H Do Rebound adjustment method 22/27
ASSEMBLY INSTRUCTIONS STEP-17 Concealed hinges are three-way adjustable: or Do Sid ep an e ls Do or Sid ep an els Horizontal by screw adjustment! Concealed hinges are three-way adjustable: or Sid Do ep an e ls or Do Sid ep an els In-and-out by loosening the hinge arm mounting screw or via cam adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Vertical via slots in the mounting plate or via cam adjustment! Sid ep an els Hinge adjustment method 2
ASSEMBLY INSTRUCTIONS STEP-18 Use screw #1 to attach plastic part #11 to back panel (G),tighten screw #1 with screwdriver #17. #11 #1 G #1x4 #17 #11x2 #11 x2 #1 x4 #17 x1 ∅3.
ASSEMBLY INSTRUCTIONS #11 x2 #12 x4 #13 x4 #17 x1 ∅3*35mm*7# STEP-19 1. Mark the position on the wall, that corresponds to the location of bracket #11 on the back panel (G); Drill and insert the expandable screw #13 by hammer. 2. Assemble the bracket #11 to the wall. Align the hole in the bracket #11 with the expandable screw #13, use screw #12 to attach it,tighten screw #12 with screwdriver #17 NOT PROVIDED LL A W 1. L AL W #11 #12 2.
ASSEMBLY INSTRUCTIONS #14 x2 STEP-20 3. Let the plastic belt #14 pass through bracket #11 and pull tightly. 2. #11 #11 WA LL #14 1.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
