ITEM NO. SCBSD0532 NOTE: This brochure contains IMPORTANT safety info. Please read and keep it for future reference.
MAINTAINANCE AND WARNING Keep furniture away from heat sources. Do not clean furniture with harsh cleaner or polishes. Do not use detergents, Solvents, abrasives, spray packs or leather cleaner. Use non-color mild soap with warm water to clean spills(Mix 1:10 soap to water) Do not place furniture under direct sunlight, material will possibly fade over time. Do not use on site dry Cleaning machine. Children should not climb or jump on the furniture.
PARTS LIST 13 3 16
Explosive View 4 16
HARDWARE LIST x8 A 15mm M6*35mm I x8 B J x12 C D x8 M7*50mm x8 K 8*30mm L x1 M4 Q R x2 S x3 x4 E x58 F x4 G x2 H x18 x2 O x4 P x9 3.5*14mm x4 M N 4*35mm T x6 M4*18mm M6*35mm x16 x9 M6*50mm U 13 SPARE A x1 M6*35mm S C x1 M7*50mm E x5 3.5*14mm L x1 4*35mm P x1 M6*50mm Q x1 M6*35mm x1 M4*18mm Be sure to inspect all packing material carefully for small parts, that may have come loose inside the carton during shipment.
ASSEMBLY INSTRUCTIONS D*8 A*8 1 Insert the wood dowel D into the holes of panel 1,then attach the cam bolt A to panel 1 by screwdriver. A x8 M6*35mm D x8 8*30mm 5 6 4 5 B*8 6 J*8 1 Use the screwdriver and cam lock B to connect panel 3,4, 5,6 with panel 1,make sure all holes aligned and tighten all bolts to secure.Then stick the part J on all bolts holes.
3 D 10 9 4 9 1 Carefully align and slide the back panel 9 & 10 into the groove along rear edge of pre-assembled unit in step 2,insert the wood dowel D into the holes of panel 3,4,5,6. D x8 8*30mm 2 4 9 10 9 1 x1 K Use the allen key K and bolt C attach the assembled step 3 with panel 2,make sure all holes aligned and tighten all bolts to secure.
T*5 14 Use the allen key K,bolt P and flat washer T to connect stretcher 14 with panel 2,make sure all holes aligned and do not tighten all bolts until step 6. T x5 K x1 M4 13 P x5 M6*50mm 13 T*4 13 Use the allen key K,bolt Q,bolt P and flat washer T to connect the stretcher 14 with the left & right leg 13,make sure all holes aligned and tighten all bolts to secure.
H*18 E*18 Use the screwdriver,screw E and plastic buckle H to connect the back panel with all side panel & top panel, vertical partition panel,bottom panel. Then fasten all screws to secure. E x18 H x18 3.
8 I I*12 Place shelf holders I into the desired position and then slide adjustable shelves 7 & 8 into place.
Use the screwdriver,bolt S and screw E to connect knob R & concealed hinges F with the panel 11&12. 10 Use the screwdriver,bolt S and screw E to connect knob R & concealed hinges G with the panel 12.
11 3 11 4 12 Use the screwdriver and screw E to connect concealed hinges on panel 11 & 12 with side panel 3 & panel 4.
12 12 Use the screwdriver and screw E to connect door panel 12 with vertical partition panel 6.
13 Use the screwdriver and screw E to attach plastic bracket M to top panel 1. keep the cabinet-level with adjustable nails in the event of a wobbly cabinet. Now your cabinet is ready to use.
14 Install the anti-collapse device. 1. Mark the position on the wall, that corresponds to the location of M on the back of panel 1; Drill and insert the expandable screw O by hammer; 2.Assemble the part M to the wall. Align the hole in the part M with the expandable screw O, screw in and tighten by screwdriver; 3.Let the plastic belt N pass through the both M and pull to tightly.
We strive to offer high-quality products, and we also try our best to satisfy each and every customer that orders from us with product or service as needed. We provide 30 days warranty starting from the time you receive the item. Each customer must provide a record of their order such as the order number, or item receipt for any items that are out of the warranty period you may also still receive replacement parts by purchasing them with our company if they are available.
